Low-strain integrity testing of drilled piles with high slenderness ratio

Sheng Huoo Ni, Lutz Lehmann, Jenq Jy Charng, Kuo Feng Lo

研究成果: Article同行評審

35 引文 斯高帕斯(Scopus)

摘要

A low strain integrity test is adopted to assess the quality of cast-in situ reinforcement concrete piles with high slenderness ratios. The disadvantage of traditional NDT equipment and signal post-process is that it cannot detect and interpret any structural faults that exist in long bored piles with high slenderness ratios. Due to insufficient impact energy, testing signal decay, soil-pile interaction and insufficiently homogeneous pile concrete material, etc., only the lower frequency portion of the test signal was used in nondestructive evaluation. In order to overcome these shortcomings, the testing devices have to first be adjusted for acquiring a lower frequency signal. Secondly, numerical signal process techniques (i.e., smoothing and amplifying) should be performed to enhance the reflection signals from the pile tip. The experimental results indicate that the testing signal identification abilities can be improved by both proper device adjustments and some signal process skills. A bored pile of up to 58 m in length with a slenderness ratio of 38.6 can be identified, even with a pile cap. Finally, a new proposed numerical signal process method, i.e., joint time-frequency analysis, is applied to explore the time-frequency component of the testing result which shows better resolution than traditional methods.

原文English
頁(從 - 到)283-293
頁數11
期刊Computers and Geotechnics
33
發行號6-7
DOIs
出版狀態Published - 2006

All Science Journal Classification (ASJC) codes

  • 岩土工程與工程地質
  • 電腦科學應用

指紋

深入研究「Low-strain integrity testing of drilled piles with high slenderness ratio」主題。共同形成了獨特的指紋。

引用此