TY - JOUR
T1 - Low-temperature deposition of diamond using chloromethane in a hot-filament chemical vapor deposition reactor
AU - Hong, Franklin Chau Nan
AU - Hsieh, Jing Chuang
AU - Wu, Jih Jen
AU - Liang, Gou Tsau
AU - Hwang, Jen Haw
N1 - Funding Information:
We acknowledgefi nancial support by the National ScienceC ouncil of the Republic of China through the grant NSC 81-0402-E-006-06an, d Dr. Hsien-Wen Ko, Material ScienceR &D Center, Chung Shan Institute of
PY - 1993/3/31
Y1 - 1993/3/31
N2 - Chloromethanes (CH2Cl2, CHCl3 and CCl4) were used as carbon sources to grow diamond at low temperature (from 380°C to 700°C). In comparison with methane, which is inefficient at growing diamond below 600°C, chloromethane was quite suitable for the growth of diamond films at low temperature. Diamond growth was possible even at 380°C, which was the lowest temperature possible in the system utilized here, using CCl4 reactant. Scanning electron micrographs, X-ray diffraction patterns and Raman spectra confirmed the presence of diamond crystallites. However, the growth rate at 380°C was only 0.05 μm h-1. Improved growth rates were achieved with hydrogen passing through the hot-filament and carbon source gas bypassing the filament (bypass configuration). The growth rate of diamond was indeed enhanced very significantly using chloromethane in the bypass configuration. However, problems such as non-uniform growth and a narrow range of possible growth parameters arose using the bypass configuration. In contrast, the growth rate was not enhanced by using methane in the bypass configuration. The advantages of chloromethane are demonstrated. Possible reasons for such advantages are also discussed.
AB - Chloromethanes (CH2Cl2, CHCl3 and CCl4) were used as carbon sources to grow diamond at low temperature (from 380°C to 700°C). In comparison with methane, which is inefficient at growing diamond below 600°C, chloromethane was quite suitable for the growth of diamond films at low temperature. Diamond growth was possible even at 380°C, which was the lowest temperature possible in the system utilized here, using CCl4 reactant. Scanning electron micrographs, X-ray diffraction patterns and Raman spectra confirmed the presence of diamond crystallites. However, the growth rate at 380°C was only 0.05 μm h-1. Improved growth rates were achieved with hydrogen passing through the hot-filament and carbon source gas bypassing the filament (bypass configuration). The growth rate of diamond was indeed enhanced very significantly using chloromethane in the bypass configuration. However, problems such as non-uniform growth and a narrow range of possible growth parameters arose using the bypass configuration. In contrast, the growth rate was not enhanced by using methane in the bypass configuration. The advantages of chloromethane are demonstrated. Possible reasons for such advantages are also discussed.
UR - https://www.scopus.com/pages/publications/50749135579
UR - https://www.scopus.com/pages/publications/50749135579#tab=citedBy
U2 - 10.1016/0925-9635(93)90084-F
DO - 10.1016/0925-9635(93)90084-F
M3 - Article
AN - SCOPUS:50749135579
SN - 0925-9635
VL - 2
SP - 365
EP - 372
JO - Diamond and Related Materials
JF - Diamond and Related Materials
IS - 2-4
ER -