Low-Voltage OTA-C Filter with an Area- and Power-Efficient OTA for Biosignal Sensor Applications

Shuenn Yuh Lee, Cheng Pin Wang, Yuan Sun Chu

研究成果: Article同行評審

45 引文 斯高帕斯(Scopus)

摘要

This paper presents a systematic method for decreasing the amount of transconductors used by an operational transconductance amplifier-capacitor (OTA-C) filter to decrease the power consumption and the active area. An OTA with a local-feedback linearized technique and a transconductance booster is proposed based on the presented method. The proposed OTA combines current division with source degeneration to enhance linearity and implement low transconductance. This topology enables the proposed OTA to drive multiple integration capacitors without an additional output stage. The OTA-based circuit realizes low power consumption by operating under a weak inversion at a supply voltage of 1 V. Thus, a fifth-order ladder-type low-pass Butterworth OTA-C filter is implemented for the acquisition of electrocardiograph signals. The proposed method is validated using a prototype fabricated through a 1P6M 0.18-μm CMOS process. Results show that in ECG signal acquisition, the proposed filter has a signal bandwidth located within 250 Hz, a dynamic range of 61.2 dB, and a power consumption of 41 nW to achieve a figure-of-merit of 5.4 × 10-13. The active area of the filter is 0.24 mm2.

原文English
文章編號8540907
頁(從 - 到)56-67
頁數12
期刊IEEE transactions on biomedical circuits and systems
13
發行號1
DOIs
出版狀態Published - 2019 2月

All Science Journal Classification (ASJC) codes

  • 生物醫學工程
  • 電氣與電子工程

指紋

深入研究「Low-Voltage OTA-C Filter with an Area- and Power-Efficient OTA for Biosignal Sensor Applications」主題。共同形成了獨特的指紋。

引用此