Machining and Dimensional Inspection of Spatial Cams on 5-Axis Machine Tools

Psang-Dain Lin, Tsian Hsing Liu

研究成果: Article

3 引文 (Scopus)

摘要

An analytical methodology is developed for NC data generation to produce and measure spatial cams on 5-axis machine tools. The Denavit-Hartenberg notation is used for expressing the ability function of the employed machine tool and in the generation of the desired cutter I measuring-probe location. NC data equations are determined by equating the corresponding elements of the machine tool's ability function to the desired tool location matrices. To validate this methodology, a designed cam was machined and its surfaces were measured by an online measurement system equipped with a touch-trigger probe on a 5-axis machine tool. The resultant cutting speed and material-removal rate during machining are also investigated. This methodology is a general one and is applicable to various spatial cams. It also combines the activities of design, manufacturing, and measurement, thus making the production process more flexible, automatic, and controllable.

原文English
頁(從 - 到)356-365
頁數10
期刊International Journal of Advanced Manufacturing Technology
12
發行號5
DOIs
出版狀態Published - 1996 九月 1

指紋

Cams
Machine tools
Machining
Inspection

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Software
  • Mechanical Engineering
  • Computer Science Applications
  • Industrial and Manufacturing Engineering

引用此文

@article{3aa55d10a14e4618b9cee384656135be,
title = "Machining and Dimensional Inspection of Spatial Cams on 5-Axis Machine Tools",
abstract = "An analytical methodology is developed for NC data generation to produce and measure spatial cams on 5-axis machine tools. The Denavit-Hartenberg notation is used for expressing the ability function of the employed machine tool and in the generation of the desired cutter I measuring-probe location. NC data equations are determined by equating the corresponding elements of the machine tool's ability function to the desired tool location matrices. To validate this methodology, a designed cam was machined and its surfaces were measured by an online measurement system equipped with a touch-trigger probe on a 5-axis machine tool. The resultant cutting speed and material-removal rate during machining are also investigated. This methodology is a general one and is applicable to various spatial cams. It also combines the activities of design, manufacturing, and measurement, thus making the production process more flexible, automatic, and controllable.",
author = "Psang-Dain Lin and Liu, {Tsian Hsing}",
year = "1996",
month = "9",
day = "1",
doi = "10.1007/BF01179811",
language = "English",
volume = "12",
pages = "356--365",
journal = "International Journal of Advanced Manufacturing Technology",
issn = "0268-3768",
publisher = "Springer London",
number = "5",

}

TY - JOUR

T1 - Machining and Dimensional Inspection of Spatial Cams on 5-Axis Machine Tools

AU - Lin, Psang-Dain

AU - Liu, Tsian Hsing

PY - 1996/9/1

Y1 - 1996/9/1

N2 - An analytical methodology is developed for NC data generation to produce and measure spatial cams on 5-axis machine tools. The Denavit-Hartenberg notation is used for expressing the ability function of the employed machine tool and in the generation of the desired cutter I measuring-probe location. NC data equations are determined by equating the corresponding elements of the machine tool's ability function to the desired tool location matrices. To validate this methodology, a designed cam was machined and its surfaces were measured by an online measurement system equipped with a touch-trigger probe on a 5-axis machine tool. The resultant cutting speed and material-removal rate during machining are also investigated. This methodology is a general one and is applicable to various spatial cams. It also combines the activities of design, manufacturing, and measurement, thus making the production process more flexible, automatic, and controllable.

AB - An analytical methodology is developed for NC data generation to produce and measure spatial cams on 5-axis machine tools. The Denavit-Hartenberg notation is used for expressing the ability function of the employed machine tool and in the generation of the desired cutter I measuring-probe location. NC data equations are determined by equating the corresponding elements of the machine tool's ability function to the desired tool location matrices. To validate this methodology, a designed cam was machined and its surfaces were measured by an online measurement system equipped with a touch-trigger probe on a 5-axis machine tool. The resultant cutting speed and material-removal rate during machining are also investigated. This methodology is a general one and is applicable to various spatial cams. It also combines the activities of design, manufacturing, and measurement, thus making the production process more flexible, automatic, and controllable.

UR - http://www.scopus.com/inward/record.url?scp=79953741375&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79953741375&partnerID=8YFLogxK

U2 - 10.1007/BF01179811

DO - 10.1007/BF01179811

M3 - Article

AN - SCOPUS:79953741375

VL - 12

SP - 356

EP - 365

JO - International Journal of Advanced Manufacturing Technology

JF - International Journal of Advanced Manufacturing Technology

SN - 0268-3768

IS - 5

ER -