Manufacturing technique of the biocompatible polymer nanofiber membrane by electrospinning

Jia Horng Lin, Jin Jia Hu, Chao Tsang Lu, Wen Cheng Chen, Chien Lin Huang, Ching Wen Lou

研究成果: Conference contribution

摘要

This research produced nanofiber membrane with polyethylene oxide (PEO) by electrospinning; the influence of the three parameters -mixture ratio of solution, electric field, and distance between the capillary tip and the collecting plate, on electrospinning was then explored. According to the results of the experiment, the fiber membrane with a diameter of 120 nm could be obtained when the optimum electric filed was 0.6 kV/cm and the distance between the capillary tip and the collecting board was 15 cm. Finally, the spunlace nonwoven was coated with the electrospinning solution with the optimum parameters, creating the asymmetric dressings.

原文English
主出版物標題Frontiers of Mechanical Engineering and Materials Engineering
頁面1404-1407
頁數4
DOIs
出版狀態Published - 2012
事件2012 International Conference on Frontiers of Mechanical Engineering and Materials Engineering, MEME 2012 - Hong Kong, Hong Kong
持續時間: 2012 七月 272012 七月 29

出版系列

名字Applied Mechanics and Materials
184-185
ISSN(列印)1660-9336
ISSN(電子)1662-7482

Other

Other2012 International Conference on Frontiers of Mechanical Engineering and Materials Engineering, MEME 2012
國家/地區Hong Kong
城市Hong Kong
期間12-07-2712-07-29

All Science Journal Classification (ASJC) codes

  • 工程 (全部)

指紋

深入研究「Manufacturing technique of the biocompatible polymer nanofiber membrane by electrospinning」主題。共同形成了獨特的指紋。

引用此