Measurements of fuel centered kerosene/N2O coaxial injector: Cold flow and hot fire test

Krishna Ahuja, Yei Chin Chao, Naresh Kumar

研究成果: Paper同行評審

摘要

In this study the mixing and combustion processes of a coaxial injector which uses kerosene/non-toxic gaseous nitrous oxide as propellants were studied. Coaxial Injector is the simplest form of injector in the liquid rocket engine. We choose the fuel center kerosene/N2O injector because of its lower pressure losses and better combustion stability. Shear coaxial injector was designed and tested with both hot flow and cold flow experiments. Initially cold flow test were conducted using water and nitrogen. During the experiments the important properties of atomization like spray angle, breakup length, droplet size and flame stability were studied. Backlight method was used to analyze the breakup length. Z type shadowgraph technique and mat lab coding were used to find the spray angle. Droplet size was measured using the Malvern spraytec system. Finally hot fire experiment was conducted using kerosene and nitrous oxide to visualize the flame stability. The comparison between theoretical and experimental result indicates improved breakup length and spray angle leading to enhanced flame stability. The flame length and combustion characteristics were measured and all the data will be considered for the future design of the combustion chamber.

原文English
出版狀態Published - 2015
事件13th International Conference on Liquid Atomization and Spray Systems, ICLASS 2015 - Tainan, Taiwan
持續時間: 2015 八月 232015 八月 27

Conference

Conference13th International Conference on Liquid Atomization and Spray Systems, ICLASS 2015
國家/地區Taiwan
城市Tainan
期間15-08-2315-08-27

All Science Journal Classification (ASJC) codes

  • 表面、塗料和薄膜

指紋

深入研究「Measurements of fuel centered kerosene/N<sub>2</sub>O coaxial injector: Cold flow and hot fire test」主題。共同形成了獨特的指紋。

引用此