Mechanical response analysis of transverse crack treatment of asphalt pavement based on DEM

Sainan Xie, Junyan Yi, Hengting Wang, Shih Hsien Yang, Meng Xu, Decheng Feng

研究成果: Article同行評審

1 引文 斯高帕斯(Scopus)


This paper studies the influence of geometric structure cutting on transverse crack treatment with the discrete elements method (DEM). Suitable strategies for geometrical structure cutting are put forward. The two-dimensional DEM model of asphalt mixture was established firstly. The asphalt mixture was simplified into a combination of voids, coarse aggregates, and asphalt mortar. The microscopic parameters of asphalt mixture were obtained by laboratory tests of asphalt mortar and mixture. The reliability of the modelling method and the microscopic parameters was verified by the DEM simulation of the laboratory tests of the asphalt mixture. Then, the mechanical response of transverse cracks treatment in different geometrical structures under wheel load and temperature load was analysed based on the orthogonal design method. This work concludes that a quadrangular groove with a depth of no less than 6 cm and a width of 60 cm is recommended for treatment of severe transverse cracks. The depth and width of the groove should be increased proportionally in zones where the traffic is higher or the temperature range is larger, but the breadth to width ratio should be less than 15.

頁(從 - 到)2206-2226
期刊International Journal of Pavement Engineering
出版狀態Published - 2022

All Science Journal Classification (ASJC) codes

  • 土木與結構工程
  • 材料力學


深入研究「Mechanical response analysis of transverse crack treatment of asphalt pavement based on DEM」主題。共同形成了獨特的指紋。