摘要
The oxidation rate constants of mercury gas (Hg 0) are difficult to determine because Hg 0 easily adsorbs on reactor walls and the reactions can be catalyzed by the solid surface. Also, the UV light which is commonly used to monitor the Hg 0 concentration can accelerate the reaction. We have demonstrated a procedure that allows the determination of gas-phase, surface-catalyzed, and photoinduced contributions in the kinetic study of the reaction of Hg 0 with chlorine gas. By experimenting with several reactors having different surface-to-volume ratios, the relative contributions of gas-phase and surface-catalyzed reactions were determined. The pressure-dependent study revealed that the gas-phase oxidation was by means of a three-body collision process. The third-order rate constant was determined to be 7.5 (±0.2) × 10 -39 cm 6.molecules -2.s -1 with N 2 as the third body at 297 ± 1°K. The surface catalyzed reaction on a quartz window was second order, and the rate constant was 2.7 × 10 -17 mL 2.molecules -1.cm -2 sec. The photoinduced contribution was obtained by comparing the Hg 0 decay rate between continuous and intermittent irradiations. The utilization efficiency of 253.7 nm photons for Hg 0 oxidations at a chlorine concentration of 6.5 × 10 15 molecules·mL -1 was <6.7 × 10 -4 molecules·photon -1.
原文 | English |
---|---|
頁(從 - 到) | 5567-5574 |
頁數 | 8 |
期刊 | Industrial and Engineering Chemistry Research |
卷 | 44 |
發行號 | 15 |
DOIs | |
出版狀態 | Published - 2005 7月 20 |
All Science Journal Classification (ASJC) codes
- 化學 (全部)
- 化學工程 (全部)
- 工業與製造工程