Numerical analysis of sintered particle trajectories in a electrostatic precipitator

Jiin-Yuh Jang, Shih Chieh Chou, Jun Bo Huang

研究成果: Conference contribution

摘要

Sintered particle trajectories in the electrostatic precipitator(EP) have been studied numerically in this study. There are five discharge electrodes in the geometry configuration. The discharge electrodes are placed inside the collecting electrodes channel which is 300mm in height, the wire-to-wire distance of each discharge electrode is 500mm. The particle trajectories in the electrostatic precipitator have been investigated considering different inlet flow velocity (1m/s, 1.5 m/s), particle diameter(5μm, 50μm) and applied voltage (56 kV, 63 kV). Results show that it would get better EP efficiency with increasing particle diameter and applied voltage. However, back corona phenomena may be induced if the charged particles are accumulated on the collecting electrode plate.

原文English
主出版物標題2011 Asia-Pacific Power and Energy Engineering Conference, APPEEC 2011 - Proceedings
DOIs
出版狀態Published - 2011 5月 16
事件2011 Asia-Pacific Power and Energy Engineering Conference, APPEEC 2011 - Wuhan, China
持續時間: 2011 3月 252011 3月 28

出版系列

名字Asia-Pacific Power and Energy Engineering Conference, APPEEC
ISSN(列印)2157-4839
ISSN(電子)2157-4847

Other

Other2011 Asia-Pacific Power and Energy Engineering Conference, APPEEC 2011
國家/地區China
城市Wuhan
期間11-03-2511-03-28

All Science Journal Classification (ASJC) codes

  • 能源工程與電力技術

指紋

深入研究「Numerical analysis of sintered particle trajectories in a electrostatic precipitator」主題。共同形成了獨特的指紋。

引用此