Numerical modeling and design of an inspection device with thermoelectric coolers for the coke oven

Tung Hsin Yen, Jiin-Yuh Jang, Yu Bin Chen, Der Her Wang

研究成果: Article

1 引文 斯高帕斯(Scopus)

摘要

In order to inspect on wall condition inside the coke oven, an inspection device has been developed to protect a camera inside and sustains high temperature long enough so that it can be permanently-installed on the pusher ram beam. The temperature of the coking chamber during operation is about 1200 °C while the maximum tolerable temperature of a camera is less than 40 °C. The device has to function as a good thermal insulator with cooling element for the camera at the pusher head and for signal cables along the beam. In this paper, the necessary conditions of the inspective device were found out by building a three-dimensional numerical model of the device to simulate the temperature distribution inside the device with CFD commercial software.

原文English
頁(從 - 到)29-32
頁數4
期刊Key Engineering Materials
419-420
DOIs
出版狀態Published - 2010 一月 1

    指紋

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

引用此