Numerical study of fuel spray and mixture formation in a spark ignition engine with asynchronous intake valve timings

Duc Khanh Nguyen, Cheng Wei Chen, Chih Yung Wu, Ming Hsun Wu

研究成果: Paper同行評審

摘要

The influences of asynchronous intake valve timings on in-cylinder flow motions and mixture formation in a four valves single cylinder port fuel injection engine operating with iso-octane were examined using computational fluid dynamics. First, the predicted spray characteristics from numerical modeling were validated against experimental results, and showed good agreements. Transient full cycle simulations were then carried out at 6000 rpm, wide open throttle condition. Three cases named “Advance 10”, “Baseline”, and “Retard 10”, which correspond to 10 oCA advancement, no change, and 10 oCA retardment of one intake valve opening and closing, respectively, were simulated. With asynchronous valve timings, swirl ratio, side-way tumble ratio of the charge motion were significantly increased comparing to the synchronous case. During intake and compression strokes, the average turbulent kinetic energy was improved by 5.49% with 10o valve timings advancements, and 8.4% with 10 oCA delay. Retard 10 case resulted in the most homogeneous mixture among the three cases studied.

原文English
出版狀態Published - 2015
事件13th International Conference on Liquid Atomization and Spray Systems, ICLASS 2015 - Tainan, Taiwan
持續時間: 2015 八月 232015 八月 27

Conference

Conference13th International Conference on Liquid Atomization and Spray Systems, ICLASS 2015
國家/地區Taiwan
城市Tainan
期間15-08-2315-08-27

All Science Journal Classification (ASJC) codes

  • 表面、塗料和薄膜

指紋

深入研究「Numerical study of fuel spray and mixture formation in a spark ignition engine with asynchronous intake valve timings」主題。共同形成了獨特的指紋。

引用此