On the linear stability analysis of journal bearings – Consideration of coupled effects of anisotropic slip and surface roughness

Wang Long Li, Zhen Hua Huang, Ching Shan Lin, Tzu Hsiang Chen, Shiuh Hwa Shyu

研究成果: Article同行評審

摘要

An average modified Reynolds equation (AMRE), considering the coupled effects of anisotropic slip and roughness, is linearized at the operation point to obtain the static and dynamic AMREs. The bearing is modelled as a spring-damper with the dynamic coefficients. The stability analysis of the rigid rotor/bearing system showed that slip length B has negative effects on load capacity W and critical mass Mcr. Slenderness ratio progressively strengthens the negative effects of B on Mcr for circumferential-slip, yet weakens those negative effects for axial-slip. For short and square bearings, W and Mcr for Peklenik number γ = 9 are greater than those for γ = 1, followed by γ = 1/9; for long bearings, W and Mcr for γ = 1/9 are greater than those for γ = 1, followed by γ = 9.

原文English
頁(從 - 到)254-266
頁數13
期刊Tribology International
137
DOIs
出版狀態Published - 2019 九月

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films

指紋 深入研究「On the linear stability analysis of journal bearings – Consideration of coupled effects of anisotropic slip and surface roughness」主題。共同形成了獨特的指紋。

引用此