Oxy-fuel combustion characteristics of pulverized coal under O2/recirculated flue gas atmospheres

Shuhn Shyurng Hou, Chiao Yu Chiang, Ta Hui Lin

研究成果: Article同行評審

18 引文 斯高帕斯(Scopus)

摘要

Oxy-fuel combustion is an effective technology for carbon capture and storage (CCS). Oxy-combustion for coal-fired power stations is a promising technology by which to diminish CO2 emissions. Unfortunately, little attention has been paid to the oxy-combustion characteristics affected by the combustion atmosphere. This paper is aimed at investigating the oxy-fuel combustion characteristics of Australian coal in a 0.3 MWth furnace. In particular, the influences of various oxygen flow rates and recirculated flue gas (RFG) on heating performance and pollutant emissions are examined in O2/RFG environments. The results show that with increases in the secondary RFG flow rate, the temperatures in the radiative and convective sections decrease and increase, respectively. At a lower oxygen flow rate, burning Australian coal emits lower residual oxygen and NO concentrations. In the flue gas, a high CO2 concentration of up to 94.8% can be achieved. Compared to air combustion, NO emissions are dramatically reduced up to 74% for Australian coal under oxy-combustion. Note that the high CO2 concentrations in the flue gas under oxy-coal combustions suggest great potential for reducing CO2 emissions through carbon capture and storage.

原文English
文章編號1362
期刊Applied Sciences (Switzerland)
10
發行號4
DOIs
出版狀態Published - 2020 2月 1

All Science Journal Classification (ASJC) codes

  • 一般材料科學
  • 儀器
  • 一般工程
  • 製程化學與技術
  • 電腦科學應用
  • 流體流動和轉移過程

指紋

深入研究「Oxy-fuel combustion characteristics of pulverized coal under O2/recirculated flue gas atmospheres」主題。共同形成了獨特的指紋。

引用此