Partial oxidation of methanol over a Pt/Al2O3 catalyst enhanced by sprays

Wei Hsin Chen, Chun Ting Shen

研究成果: Article

7 引文 斯高帕斯(Scopus)

摘要

Reaction characteristics of POM (partial oxidation of methanol) over a Pt/Al2O3 catalyst are investigated in this study. Particular attention is paid to the POM performance enhanced by sprays. The influences of the O2-to-methanol molar ratio (the O2/C ratio), the catalyst bed with/without preheating, and the preheating temperature on POM are also examined. Compared to liquid methanol dropped onto the catalyst bed, atomized methanol can be uniformly dispersed on the catalyst bed when sprays are applied. Therefore, the POM performance is enhanced drastically by sprays. With increasing the O2/C ratio, POM progressively evolves into methanol combustion, and methane formation inherently changes from kinetically dominating mechanism to thermodynamically governing one. When sprays are practiced, the performance of POM under preheating is close to that under cold start, and an increase in preheating temperature intensifies the performance to a small extent. With the operation of sprays, the relative methanol conversion can be improved over 30%. Therefore, using sprays and cold start for POM over the Pt/Al2O3 catalyst is a feasible operation to produce syngas. From the perspectives of syngas production and methanol conversion, the optimum O2/C ratio for POM operation with sprays and cold start is located at 0.7.

原文English
頁(從 - 到)1-12
頁數12
期刊Energy
106
DOIs
出版狀態Published - 2016 七月 1

    指紋

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Building and Construction
  • Pollution
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

引用此