Performance evaluation of intermediate temperature solid oxide fuel cell with La0.75Sr0.25CuO2.5-δ cathode

Ho Chieh Yu, Feng Zhao, Anil V. Virkar, Kuan Zong Fung

研究成果: Paper同行評審

摘要

The strontium doped lanthanum cuprate with tetragonal perovskite structure has been considered a potential cathode material for intermediate temperature solid oxide fuel cells (IT-SOFCs). This study presents work on the performance evaluation of using La0.75Sr0.25CuO2.5-δ (LSCu) as cathode material for IT-SOFC carried out by the Ni-YSZ anode supported single cell. The cell consists of a 600-μm-thick porous Ni/YSZ anode as cell support, a yttria-stabilized zirconia (YSZ) thin film layer (ca. 8 μm) as electrolyte, and a porous LSCu layer as cathode (ca. 40 μm). For the performance testing, the maximum power density at 800°C was 0.65 W/cm 2 with 150 and 500 seem of hydrogen and air flow, respectively. However, the area-specific resistances (ASRs) of the cell were 0.32, 0.75, and 1.21 ω cm2 at 800, 750, and 700°C, respectively. For further improvement, the ASR will be decreased by LSCu compositional modification and microstructure optimization of the LSCu cathode layer.

原文English
頁面1758-1763
頁數6
出版狀態Published - 2005
事件9th International Symposium on Solid Oxide Fuel Cells, SOFC IX - Quebec, Canada
持續時間: 2005 五月 152005 五月 20

Other

Other9th International Symposium on Solid Oxide Fuel Cells, SOFC IX
國家Canada
城市Quebec
期間05-05-1505-05-20

All Science Journal Classification (ASJC) codes

  • Engineering(all)

指紋 深入研究「Performance evaluation of intermediate temperature solid oxide fuel cell with La<sub>0.75</sub>Sr<sub>0.25</sub>CuO<sub>2.5-δ</sub> cathode」主題。共同形成了獨特的指紋。

引用此