PIV measurements in a two-pass 90-deg ribbed-wall parallelogram channel

Tong Miin Liou, Shyy Woei Chang, Shu Po Chan, Yu Shuai Liu

研究成果: Conference contribution

3 引文 (Scopus)

摘要

A parallelogram channel has drawn very little or no attention in the open literature although it appears as a crosssectional configuration of some gas turbine rotor blades. Particle Image velocimetry is presented of local flow structure in a two-pass 90-deg ribbed-wall parallelogram channel with a 180-deg sharp turn. The channel has a cross-sectional equal length, 45.5 mm, of adjacent sides and two pairs of opposite angles are 45-deg and 135-deg. The rib height to channel height ratio is 0.1. All the measurements were performed at a fixed Reynolds number, characterized by channel hydraulic diameter of 32.17 mm and cross-sectional bulk mean velocity, of 10000 and a null rotating number. Results are discussed in terms of the distributions of streamwise and secondary-flow mean velocity vector, turbulent intensity, Reynolds stress, and turbulent kinetic energy of the cooling air. It is found that the flow is not periodically fully developed in pitchwise direction through the inline 90-deg ribbed straight inlet and outlet leg. Pitchwise variation of reattachment length is revealed and comparison with reported values in square channels is made. Whether the 180-deg sharp turn induced separation bubble exists in the ribbed parallelogram channel is also documented. Moreover, the measured secondary flow results inside the turn are successively used to explain previous heat transfer trends.

原文English
主出版物標題Heat Transfer
發行者American Society of Mechanical Engineers (ASME)
ISBN(電子)9780791845714
DOIs
出版狀態Published - 2014 一月 1
事件ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014 - Dusseldorf, Germany
持續時間: 2014 六月 162014 六月 20

出版系列

名字Proceedings of the ASME Turbo Expo
5A

Other

OtherASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014
國家Germany
城市Dusseldorf
期間14-06-1614-06-20

指紋

Secondary flow
Flow structure
Kinetic energy
Velocity measurement
Turbomachine blades
Gas turbines
Reynolds number
Rotors
Hydraulics
Heat transfer
Cooling
Air

All Science Journal Classification (ASJC) codes

  • Engineering(all)

引用此文

Liou, T. M., Chang, S. W., Chan, S. P., & Liu, Y. S. (2014). PIV measurements in a two-pass 90-deg ribbed-wall parallelogram channel. 於 Heat Transfer (Proceedings of the ASME Turbo Expo; 卷 5A). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/GT2014-25248
Liou, Tong Miin ; Chang, Shyy Woei ; Chan, Shu Po ; Liu, Yu Shuai. / PIV measurements in a two-pass 90-deg ribbed-wall parallelogram channel. Heat Transfer. American Society of Mechanical Engineers (ASME), 2014. (Proceedings of the ASME Turbo Expo).
@inproceedings{ec6a96135b0249238023fba48ff8d3ef,
title = "PIV measurements in a two-pass 90-deg ribbed-wall parallelogram channel",
abstract = "A parallelogram channel has drawn very little or no attention in the open literature although it appears as a crosssectional configuration of some gas turbine rotor blades. Particle Image velocimetry is presented of local flow structure in a two-pass 90-deg ribbed-wall parallelogram channel with a 180-deg sharp turn. The channel has a cross-sectional equal length, 45.5 mm, of adjacent sides and two pairs of opposite angles are 45-deg and 135-deg. The rib height to channel height ratio is 0.1. All the measurements were performed at a fixed Reynolds number, characterized by channel hydraulic diameter of 32.17 mm and cross-sectional bulk mean velocity, of 10000 and a null rotating number. Results are discussed in terms of the distributions of streamwise and secondary-flow mean velocity vector, turbulent intensity, Reynolds stress, and turbulent kinetic energy of the cooling air. It is found that the flow is not periodically fully developed in pitchwise direction through the inline 90-deg ribbed straight inlet and outlet leg. Pitchwise variation of reattachment length is revealed and comparison with reported values in square channels is made. Whether the 180-deg sharp turn induced separation bubble exists in the ribbed parallelogram channel is also documented. Moreover, the measured secondary flow results inside the turn are successively used to explain previous heat transfer trends.",
author = "Liou, {Tong Miin} and Chang, {Shyy Woei} and Chan, {Shu Po} and Liu, {Yu Shuai}",
year = "2014",
month = "1",
day = "1",
doi = "10.1115/GT2014-25248",
language = "English",
series = "Proceedings of the ASME Turbo Expo",
publisher = "American Society of Mechanical Engineers (ASME)",
booktitle = "Heat Transfer",

}

Liou, TM, Chang, SW, Chan, SP & Liu, YS 2014, PIV measurements in a two-pass 90-deg ribbed-wall parallelogram channel. 於 Heat Transfer. Proceedings of the ASME Turbo Expo, 卷 5A, American Society of Mechanical Engineers (ASME), ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014, Dusseldorf, Germany, 14-06-16. https://doi.org/10.1115/GT2014-25248

PIV measurements in a two-pass 90-deg ribbed-wall parallelogram channel. / Liou, Tong Miin; Chang, Shyy Woei; Chan, Shu Po; Liu, Yu Shuai.

Heat Transfer. American Society of Mechanical Engineers (ASME), 2014. (Proceedings of the ASME Turbo Expo; 卷 5A).

研究成果: Conference contribution

TY - GEN

T1 - PIV measurements in a two-pass 90-deg ribbed-wall parallelogram channel

AU - Liou, Tong Miin

AU - Chang, Shyy Woei

AU - Chan, Shu Po

AU - Liu, Yu Shuai

PY - 2014/1/1

Y1 - 2014/1/1

N2 - A parallelogram channel has drawn very little or no attention in the open literature although it appears as a crosssectional configuration of some gas turbine rotor blades. Particle Image velocimetry is presented of local flow structure in a two-pass 90-deg ribbed-wall parallelogram channel with a 180-deg sharp turn. The channel has a cross-sectional equal length, 45.5 mm, of adjacent sides and two pairs of opposite angles are 45-deg and 135-deg. The rib height to channel height ratio is 0.1. All the measurements were performed at a fixed Reynolds number, characterized by channel hydraulic diameter of 32.17 mm and cross-sectional bulk mean velocity, of 10000 and a null rotating number. Results are discussed in terms of the distributions of streamwise and secondary-flow mean velocity vector, turbulent intensity, Reynolds stress, and turbulent kinetic energy of the cooling air. It is found that the flow is not periodically fully developed in pitchwise direction through the inline 90-deg ribbed straight inlet and outlet leg. Pitchwise variation of reattachment length is revealed and comparison with reported values in square channels is made. Whether the 180-deg sharp turn induced separation bubble exists in the ribbed parallelogram channel is also documented. Moreover, the measured secondary flow results inside the turn are successively used to explain previous heat transfer trends.

AB - A parallelogram channel has drawn very little or no attention in the open literature although it appears as a crosssectional configuration of some gas turbine rotor blades. Particle Image velocimetry is presented of local flow structure in a two-pass 90-deg ribbed-wall parallelogram channel with a 180-deg sharp turn. The channel has a cross-sectional equal length, 45.5 mm, of adjacent sides and two pairs of opposite angles are 45-deg and 135-deg. The rib height to channel height ratio is 0.1. All the measurements were performed at a fixed Reynolds number, characterized by channel hydraulic diameter of 32.17 mm and cross-sectional bulk mean velocity, of 10000 and a null rotating number. Results are discussed in terms of the distributions of streamwise and secondary-flow mean velocity vector, turbulent intensity, Reynolds stress, and turbulent kinetic energy of the cooling air. It is found that the flow is not periodically fully developed in pitchwise direction through the inline 90-deg ribbed straight inlet and outlet leg. Pitchwise variation of reattachment length is revealed and comparison with reported values in square channels is made. Whether the 180-deg sharp turn induced separation bubble exists in the ribbed parallelogram channel is also documented. Moreover, the measured secondary flow results inside the turn are successively used to explain previous heat transfer trends.

UR - http://www.scopus.com/inward/record.url?scp=84922269762&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84922269762&partnerID=8YFLogxK

U2 - 10.1115/GT2014-25248

DO - 10.1115/GT2014-25248

M3 - Conference contribution

AN - SCOPUS:84922269762

T3 - Proceedings of the ASME Turbo Expo

BT - Heat Transfer

PB - American Society of Mechanical Engineers (ASME)

ER -

Liou TM, Chang SW, Chan SP, Liu YS. PIV measurements in a two-pass 90-deg ribbed-wall parallelogram channel. 於 Heat Transfer. American Society of Mechanical Engineers (ASME). 2014. (Proceedings of the ASME Turbo Expo). https://doi.org/10.1115/GT2014-25248