跳至主導覽 跳至搜尋 跳過主要內容

Planar ultra-wideband bandpass filter using edge coupled microstrip lines and stepped impedance open stub

研究成果: Article同行評審

94   連結會在新分頁中打開 引文 斯高帕斯(Scopus)

摘要

The design and implementation of a planar ultra-wideband (UWB) bandpass filter are presented. Three interdigital edge coupled microstrip lines are used for coupling enhancement. A stepped impedance open stub is used for realizing transmission zeros simultaneously in upper and lower stop bands as well as impedance matching in ultra-wide pass band. A pass band from 3.1-10.6 GHz is achieved with an insertion loss of 0.5 dB, a return loss of about 18 dB, a sharp out-of-band-rejection, and a low group delay of only 0.21 ns. Single- and double-section filters are realized to meet the UWB mask requirement. The design of the filter is simple, and it shows good frequency response.

原文English
頁(從 - 到)649-651
頁數3
期刊IEEE Microwave and Wireless Components Letters
17
發行號9
DOIs
出版狀態Published - 2007 9月

All Science Journal Classification (ASJC) codes

  • 凝聚態物理學
  • 電氣與電子工程

指紋

深入研究「Planar ultra-wideband bandpass filter using edge coupled microstrip lines and stepped impedance open stub」主題。共同形成了獨特的指紋。

引用此