Polymer light-emitting diodes with thermal inkjet printed poly(3,4-ethylenedioxythiophene):polystyrenesulfonate as transparent anode

Wei Yang Chou; Shih Ting Lin; Horng Long Cheng; Ming Hau Chang; Hong Ru Guo; Ten Chin Wen; Yu Shen Mai; Ji Bin Horng; Chia Wei Kuo; Fu Ching Tang; Chi Chang Liao; Ching Long Chiu

doi:10.1016/j.tsf.2006.09.025

Polymer light-emitting diodes with thermal inkjet printed poly(3,4-ethylenedioxythiophene):polystyrenesulfonate as transparent anode

Wei Yang Chou, Shih Ting Lin, Horng Long Cheng, Ming Hau Chang, Hong Ru Guo, Ten Chin Wen, Yu Shen Mai, Ji Bin Horng, Chia Wei Kuo, Fu Ching Tang, Chi Chang Liao, Ching Long Chiu

研究成果: Article › 同行評審

12 引文斯高帕斯（Scopus）

摘要

Conjugated poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) films, prepared by inkjet-printing and spin-coating methods, have been studied using atomic force microscopy, micro-Raman spectroscopy, photoelectron spectroscopy, and four-point probe conductivity measurements. Electrical conductivity of the inkjet-printed film was enhanced by a factor of around 10 when compared to a spin-coating film. The improved conductivity was attributed to longer effective conjugation length of PEDOT chains in inkjet-printing PEDOT:PSS films as suggested by their micro-Raman spectroscopy. PEDOT:PSS films formed by the inkjet-printing method are appropriate for use as an anode for simplification of the fabrication process of polymer light-emitting diodes whose performance is about 1.2 cd/A.

原文	English
頁（從 - 到）	3718-3723
頁數	6
期刊	Thin Solid Films
卷	515
發行號	7-8
DOIs	https://doi.org/10.1016/j.tsf.2006.09.025
出版狀態	Published - 2007 2月 26

All Science Journal Classification (ASJC) codes

電子、光磁材料
表面和介面
表面、塗料和薄膜
金屬和合金
材料化學

存取文件

10.1016/j.tsf.2006.09.025

其它文件與鏈接

引用此

Chou, W. Y., Lin, S. T., Cheng, H. L., Chang, M. H., Guo, H. R., Wen, T. C., Mai, Y. S., Horng, J. B., Kuo, C. W., Tang, F. C., Liao, C. C., & Chiu, C. L. (2007). Polymer light-emitting diodes with thermal inkjet printed poly(3,4-ethylenedioxythiophene):polystyrenesulfonate as transparent anode. Thin Solid Films, 515(7-8), 3718-3723. https://doi.org/10.1016/j.tsf.2006.09.025

@article{4c59df0863044e4ebdf4710b3047675e,

title = "Polymer light-emitting diodes with thermal inkjet printed poly(3,4-ethylenedioxythiophene):polystyrenesulfonate as transparent anode",

abstract = "Conjugated poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) films, prepared by inkjet-printing and spin-coating methods, have been studied using atomic force microscopy, micro-Raman spectroscopy, photoelectron spectroscopy, and four-point probe conductivity measurements. Electrical conductivity of the inkjet-printed film was enhanced by a factor of around 10 when compared to a spin-coating film. The improved conductivity was attributed to longer effective conjugation length of PEDOT chains in inkjet-printing PEDOT:PSS films as suggested by their micro-Raman spectroscopy. PEDOT:PSS films formed by the inkjet-printing method are appropriate for use as an anode for simplification of the fabrication process of polymer light-emitting diodes whose performance is about 1.2 cd/A.",

author = "Chou, {Wei Yang} and Lin, {Shih Ting} and Cheng, {Horng Long} and Chang, {Ming Hau} and Guo, {Hong Ru} and Wen, {Ten Chin} and Mai, {Yu Shen} and Horng, {Ji Bin} and Kuo, {Chia Wei} and Tang, {Fu Ching} and Liao, {Chi Chang} and Chiu, {Ching Long}",

note = "Funding Information: The authors would like to thank the National Science Council of the Republic of China for financially supporting this research under Contract Nos. NSC 94-2112-M-006-022 and NSC 94-2112-M-006-021, and the Center for Micro/Nano Science and Technology Research, National Cheng Kung University, Taiwan, for their equipment support and cooperation.",

year = "2007",

month = feb,

day = "26",

doi = "10.1016/j.tsf.2006.09.025",

language = "English",

volume = "515",

pages = "3718--3723",

journal = "Thin Solid Films",

issn = "0040-6090",

publisher = "Elsevier BV",

number = "7-8",

}

TY - JOUR

T1 - Polymer light-emitting diodes with thermal inkjet printed poly(3,4-ethylenedioxythiophene):polystyrenesulfonate as transparent anode

AU - Chou, Wei Yang

AU - Lin, Shih Ting

AU - Cheng, Horng Long

AU - Chang, Ming Hau

AU - Guo, Hong Ru

AU - Wen, Ten Chin

AU - Mai, Yu Shen

AU - Horng, Ji Bin

AU - Kuo, Chia Wei

AU - Tang, Fu Ching

AU - Liao, Chi Chang

AU - Chiu, Ching Long

N1 - Funding Information: The authors would like to thank the National Science Council of the Republic of China for financially supporting this research under Contract Nos. NSC 94-2112-M-006-022 and NSC 94-2112-M-006-021, and the Center for Micro/Nano Science and Technology Research, National Cheng Kung University, Taiwan, for their equipment support and cooperation.

PY - 2007/2/26

Y1 - 2007/2/26

N2 - Conjugated poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) films, prepared by inkjet-printing and spin-coating methods, have been studied using atomic force microscopy, micro-Raman spectroscopy, photoelectron spectroscopy, and four-point probe conductivity measurements. Electrical conductivity of the inkjet-printed film was enhanced by a factor of around 10 when compared to a spin-coating film. The improved conductivity was attributed to longer effective conjugation length of PEDOT chains in inkjet-printing PEDOT:PSS films as suggested by their micro-Raman spectroscopy. PEDOT:PSS films formed by the inkjet-printing method are appropriate for use as an anode for simplification of the fabrication process of polymer light-emitting diodes whose performance is about 1.2 cd/A.

AB - Conjugated poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) films, prepared by inkjet-printing and spin-coating methods, have been studied using atomic force microscopy, micro-Raman spectroscopy, photoelectron spectroscopy, and four-point probe conductivity measurements. Electrical conductivity of the inkjet-printed film was enhanced by a factor of around 10 when compared to a spin-coating film. The improved conductivity was attributed to longer effective conjugation length of PEDOT chains in inkjet-printing PEDOT:PSS films as suggested by their micro-Raman spectroscopy. PEDOT:PSS films formed by the inkjet-printing method are appropriate for use as an anode for simplification of the fabrication process of polymer light-emitting diodes whose performance is about 1.2 cd/A.

UR - http://www.scopus.com/inward/record.url?scp=33846935270&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33846935270&partnerID=8YFLogxK

U2 - 10.1016/j.tsf.2006.09.025

DO - 10.1016/j.tsf.2006.09.025

M3 - Article

AN - SCOPUS:33846935270

SN - 0040-6090

VL - 515

SP - 3718

EP - 3723

JO - Thin Solid Films

JF - Thin Solid Films

IS - 7-8

ER -

Polymer light-emitting diodes with thermal inkjet printed poly(3,4-ethylenedioxythiophene):polystyrenesulfonate as transparent anode

摘要

All Science Journal Classification (ASJC) codes

存取文件

其它文件與鏈接

指紋

引用此