Polymer microchip for electrophoresis-mass spectrometry fabricated by hot embossing and low temperature direct bonding

T. Suzuki, F. Kitagawa, H. Shinohara, J. Mizuno, K. Otsuka, S. Shoji

研究成果: Conference contribution

9 引文 斯高帕斯(Scopus)

摘要

Integrated electrophoresis-mass spectrometry polymer devices were fabricated. The electrospray ionization (ESI) emitter tip structure was formed directly at the microchip electrophoresis (MCE) outlet. Since these devices enable negligible dead volume at the electrospray port, efficient spray of the sample necessary for high resolution mass spectrometry (MS) was realized. Stable spray was also achieved at the low flow rate (∼0.1 μL/min) without additional pump. Low cost and high performance COP MCE-MS chip was fabricated by hot embossing and low temperature direct bonding.

原文English
主出版物標題TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems
頁面1617-1620
頁數4
DOIs
出版狀態Published - 2007
事件4th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS '07 - Lyon, France
持續時間: 2007 6月 102007 6月 14

出版系列

名字TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems

Other

Other4th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS '07
國家/地區France
城市Lyon
期間07-06-1007-06-14

All Science Journal Classification (ASJC) codes

  • 控制與系統工程
  • 電氣與電子工程

指紋

深入研究「Polymer microchip for electrophoresis-mass spectrometry fabricated by hot embossing and low temperature direct bonding」主題。共同形成了獨特的指紋。

引用此