Porous ferrite synthesis and catalytic effect on benzene degradation

Hsing Cheng Lu, Juu En Chang, Weng Wa Vong, Hung Ta Chen, Ying Liang Chen

研究成果: Article

8 引文 斯高帕斯(Scopus)

摘要

In this study, feasibility of porous ferrite (MFe2O4) synthesis and catalytic effect on benzene degradation was evaluated. Various types of ferrites were synthesized by CuO, ZnO, NiO, and Fe2O3 under different Fe/M molar ratios and sintering temperatures. Porous ferrite synthesized by NiO, Fe2O3, polyvinyl alcohol (PVA) and kaolinite addition with appropriate sintering conditions were used in column tests to simulate benzene degradation in permeable catalyst barriers. Results from this research showed NiFe2O4 sintered with Fe/M molar ratio of 2 at 1000°C had highest removal efficiency on Fenton-like benzene degradation. The removal efficiency of different ferrites on benzene degradation is in the order of: NiFe2O4 > ZnFe2O4 > CuFe2O4 > Fe3O4. Significant removal of benzene was observed when benzene/H2O2 (w/w) ratio = 1/32 and hydraulic retention time of 330 s. Under such reaction conditions, 94.98% of benzene was degraded at a relative liquid volume of 120. According to this study, porous Ni ferrite synthesized with Fe/M molar ratio = 2, 5% PVA, 10% kaolinite and sintered at 1000°C under nitrogen atmosphere for 3 h was a favorable catalyst in generating Fenton-like reaction. It was regarded as potential catalytic material with environmental friendly characteristics that can be used in permeable catalytic barriers.

原文English
頁(從 - 到)855-865
頁數11
期刊International Journal of Physical Sciences
6
發行號4
出版狀態Published - 2011 二月 18

    指紋

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Physics and Astronomy(all)

引用此