Preparation and characterization of cubic and rod-shapedindium tin oxide powdersusing thehydrothermal process

Kuo Chin Hsu, Jiunn Der Liao, Zheng Zhong Xie, Yaw Shyan Fu

研究成果: Conference contribution

摘要

The cubic and rod-shaped powders of indiumtin oxide were synthesized at a stable temperature reaction for 18h using the surfactant aid hydrothermal method under various conditions. The cubic and rod-shaped powder size changeswiththe concentration of the precursor. The finished products of indiumtin oxide can be obtained by calcination at 500°C for 2h in air. Characterizationwas conducted usingscanning electron microscopy (SEM),energy dispersive spectrometry (EDS), X-ray diffractometry (XRD), thermogravimetric analyzer/differential thermal analysis (TG/DTA) and the Brunauer-Emm ett-Teller (BET). XRD analysis shows that the conditions of this experiment can produce pure ITO powders. The characterization of cubic and rod-shaped ITO powders is also discussed.

原文English
主出版物標題Applied Science and Precision Engineering Innovation
頁面64-68
頁數5
DOIs
出版狀態Published - 2014 一月 1
事件International Applied Science and Precision Engineering Conference 2013, ASPEC 2013 - NanTou, Taiwan
持續時間: 2013 十月 182013 十月 22

出版系列

名字Applied Mechanics and Materials
479-480
ISSN(列印)1660-9336
ISSN(電子)1662-7482

Other

OtherInternational Applied Science and Precision Engineering Conference 2013, ASPEC 2013
國家Taiwan
城市NanTou
期間13-10-1813-10-22

指紋

Tin oxides
Powders
X ray diffraction analysis
Oxides
Calcination
Differential thermal analysis
Spectrometry
Electron microscopy
Surface active agents
Scanning electron microscopy
Air
Experiments
Temperature

All Science Journal Classification (ASJC) codes

  • Engineering(all)

引用此文

Hsu, K. C., Liao, J. D., Xie, Z. Z., & Fu, Y. S. (2014). Preparation and characterization of cubic and rod-shapedindium tin oxide powdersusing thehydrothermal process. 於 Applied Science and Precision Engineering Innovation (頁 64-68). (Applied Mechanics and Materials; 卷 479-480). https://doi.org/10.4028/www.scientific.net/AMM.479-480.64
Hsu, Kuo Chin ; Liao, Jiunn Der ; Xie, Zheng Zhong ; Fu, Yaw Shyan. / Preparation and characterization of cubic and rod-shapedindium tin oxide powdersusing thehydrothermal process. Applied Science and Precision Engineering Innovation. 2014. 頁 64-68 (Applied Mechanics and Materials).
@inproceedings{9a513d23329e491cad5b31312ba1bc0e,
title = "Preparation and characterization of cubic and rod-shapedindium tin oxide powdersusing thehydrothermal process",
abstract = "The cubic and rod-shaped powders of indiumtin oxide were synthesized at a stable temperature reaction for 18h using the surfactant aid hydrothermal method under various conditions. The cubic and rod-shaped powder size changeswiththe concentration of the precursor. The finished products of indiumtin oxide can be obtained by calcination at 500°C for 2h in air. Characterizationwas conducted usingscanning electron microscopy (SEM),energy dispersive spectrometry (EDS), X-ray diffractometry (XRD), thermogravimetric analyzer/differential thermal analysis (TG/DTA) and the Brunauer-Emm ett-Teller (BET). XRD analysis shows that the conditions of this experiment can produce pure ITO powders. The characterization of cubic and rod-shaped ITO powders is also discussed.",
author = "Hsu, {Kuo Chin} and Liao, {Jiunn Der} and Xie, {Zheng Zhong} and Fu, {Yaw Shyan}",
year = "2014",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/AMM.479-480.64",
language = "English",
isbn = "9783037859476",
series = "Applied Mechanics and Materials",
pages = "64--68",
booktitle = "Applied Science and Precision Engineering Innovation",

}

Hsu, KC, Liao, JD, Xie, ZZ & Fu, YS 2014, Preparation and characterization of cubic and rod-shapedindium tin oxide powdersusing thehydrothermal process. 於 Applied Science and Precision Engineering Innovation. Applied Mechanics and Materials, 卷 479-480, 頁 64-68, International Applied Science and Precision Engineering Conference 2013, ASPEC 2013, NanTou, Taiwan, 13-10-18. https://doi.org/10.4028/www.scientific.net/AMM.479-480.64

Preparation and characterization of cubic and rod-shapedindium tin oxide powdersusing thehydrothermal process. / Hsu, Kuo Chin; Liao, Jiunn Der; Xie, Zheng Zhong; Fu, Yaw Shyan.

Applied Science and Precision Engineering Innovation. 2014. p. 64-68 (Applied Mechanics and Materials; 卷 479-480).

研究成果: Conference contribution

TY - GEN

T1 - Preparation and characterization of cubic and rod-shapedindium tin oxide powdersusing thehydrothermal process

AU - Hsu, Kuo Chin

AU - Liao, Jiunn Der

AU - Xie, Zheng Zhong

AU - Fu, Yaw Shyan

PY - 2014/1/1

Y1 - 2014/1/1

N2 - The cubic and rod-shaped powders of indiumtin oxide were synthesized at a stable temperature reaction for 18h using the surfactant aid hydrothermal method under various conditions. The cubic and rod-shaped powder size changeswiththe concentration of the precursor. The finished products of indiumtin oxide can be obtained by calcination at 500°C for 2h in air. Characterizationwas conducted usingscanning electron microscopy (SEM),energy dispersive spectrometry (EDS), X-ray diffractometry (XRD), thermogravimetric analyzer/differential thermal analysis (TG/DTA) and the Brunauer-Emm ett-Teller (BET). XRD analysis shows that the conditions of this experiment can produce pure ITO powders. The characterization of cubic and rod-shaped ITO powders is also discussed.

AB - The cubic and rod-shaped powders of indiumtin oxide were synthesized at a stable temperature reaction for 18h using the surfactant aid hydrothermal method under various conditions. The cubic and rod-shaped powder size changeswiththe concentration of the precursor. The finished products of indiumtin oxide can be obtained by calcination at 500°C for 2h in air. Characterizationwas conducted usingscanning electron microscopy (SEM),energy dispersive spectrometry (EDS), X-ray diffractometry (XRD), thermogravimetric analyzer/differential thermal analysis (TG/DTA) and the Brunauer-Emm ett-Teller (BET). XRD analysis shows that the conditions of this experiment can produce pure ITO powders. The characterization of cubic and rod-shaped ITO powders is also discussed.

UR - http://www.scopus.com/inward/record.url?scp=84891087045&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84891087045&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.479-480.64

DO - 10.4028/www.scientific.net/AMM.479-480.64

M3 - Conference contribution

AN - SCOPUS:84891087045

SN - 9783037859476

T3 - Applied Mechanics and Materials

SP - 64

EP - 68

BT - Applied Science and Precision Engineering Innovation

ER -

Hsu KC, Liao JD, Xie ZZ, Fu YS. Preparation and characterization of cubic and rod-shapedindium tin oxide powdersusing thehydrothermal process. 於 Applied Science and Precision Engineering Innovation. 2014. p. 64-68. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.479-480.64