Pulverized coal burnout in blast furnace simulated by a drop tube furnace

Shan Wen Du, Wei Hsin Chen, John A. Lucas

研究成果: Article同行評審

104 引文 斯高帕斯(Scopus)


Reactions of pulverized coal injection (PCI) in a blast furnace were simulated using a drop tube furnace (DTF) to investigate the burnout behavior of a number of coals and coal blends. For the coals with the fuel ratio ranging from 1.36 to 6.22, the experimental results indicated that the burnout increased with decreasing the fuel ratio, except for certain coals departing from the general trend. One of the coals with the fuel ratio of 6.22 has shown its merit in combustion, implying that the blending ratio of the coal in PCI operation can be raised for a higher coke replacement ratio. The experiments also suggested that increasing blast temperature was an efficient countermeasure for promoting the combustibility of the injected coals. Higher fuel burnout could be achieved when the particle size of coal was reduced from 60-100 to 100-200 mesh. However, once the size of the tested coals was in the range of 200 and 325 mesh, the burnout could not be improved further, resulting from the agglomeration of fine particles. Considering coal blend reactions, the blending ratio of coals in PCI may be adjusted by the individual coal burnout rather than by the fuel ratio.

頁(從 - 到)576-581
出版狀態Published - 2010 2月

All Science Journal Classification (ASJC) codes

  • 土木與結構工程
  • 建築與營造
  • 污染
  • 機械工業
  • 工業與製造工程
  • 電氣與電子工程


深入研究「Pulverized coal burnout in blast furnace simulated by a drop tube furnace」主題。共同形成了獨特的指紋。