Pyrrolic-Type Nitrogen-Doped Hierarchical Macro/Mesoporous Carbon as a Bifunctional Host for High-Performance Thick Cathodes for Lithium-Sulfur Batteries

Pauline Han, Sheng Heng Chung, Arumugam Manthiram

研究成果: Article

2 引文 (Scopus)

摘要

Lithium-sulfur (Li-S) batteries are highly considered as a next-generation energy storage device due to their high theoretical energy density. For practical viability, reasonable active-material loading of >4.0 mg cm −2 must be employed, at a cost to the intrinsic instability of sulfur cathodes. The incursion of lithium polysulfides (LiPS) at higher sulfur loadings results in low active material utilization and poor cell cycling capability. The use of high-surface-area hierarchical macro/mesoporous inverse opal (IOP) carbons to investigate the effects of pore volume and surface area on the electrochemical stability of high-loading, high-thickness cathodes for Li-S batteries is presented here. The IOP carbons are additionally doped with pyrrolic-type nitrogen groups (N-IOP) to act as a polar polysulfide mediator and enhance the active-material reutilization. With a high sulfur loading of 6.0 mg cm −2 , the Li-S cells assembled with IOP and N-IOP carbons are able to attain a high specific capacity of, respectively, 1242 and 1162 mA h g −1 . The N-IOP enables the Li-S cells to demonstrate good electrochemical performance over 300 cycles.

原文English
文章編號1900690
期刊Small
15
發行號16
DOIs
出版狀態Published - 2019 四月 18

指紋

Lithium
Sulfur
Macros
Electrodes
Cathodes
Nitrogen
Carbon
Polysulfides
Energy storage
Lithium sulfur batteries
Costs and Cost Analysis
Equipment and Supplies
Costs
polysulfide

All Science Journal Classification (ASJC) codes

  • Biotechnology
  • Biomaterials
  • Chemistry(all)
  • Materials Science(all)

引用此文

@article{ad041022255e41d19bd8ad15d9bb4f53,
title = "Pyrrolic-Type Nitrogen-Doped Hierarchical Macro/Mesoporous Carbon as a Bifunctional Host for High-Performance Thick Cathodes for Lithium-Sulfur Batteries",
abstract = "Lithium-sulfur (Li-S) batteries are highly considered as a next-generation energy storage device due to their high theoretical energy density. For practical viability, reasonable active-material loading of >4.0 mg cm −2 must be employed, at a cost to the intrinsic instability of sulfur cathodes. The incursion of lithium polysulfides (LiPS) at higher sulfur loadings results in low active material utilization and poor cell cycling capability. The use of high-surface-area hierarchical macro/mesoporous inverse opal (IOP) carbons to investigate the effects of pore volume and surface area on the electrochemical stability of high-loading, high-thickness cathodes for Li-S batteries is presented here. The IOP carbons are additionally doped with pyrrolic-type nitrogen groups (N-IOP) to act as a polar polysulfide mediator and enhance the active-material reutilization. With a high sulfur loading of 6.0 mg cm −2 , the Li-S cells assembled with IOP and N-IOP carbons are able to attain a high specific capacity of, respectively, 1242 and 1162 mA h g −1 . The N-IOP enables the Li-S cells to demonstrate good electrochemical performance over 300 cycles.",
author = "Pauline Han and Chung, {Sheng Heng} and Arumugam Manthiram",
year = "2019",
month = "4",
day = "18",
doi = "10.1002/smll.201900690",
language = "English",
volume = "15",
journal = "Small",
issn = "1613-6810",
publisher = "Wiley-VCH Verlag",
number = "16",

}

TY - JOUR

T1 - Pyrrolic-Type Nitrogen-Doped Hierarchical Macro/Mesoporous Carbon as a Bifunctional Host for High-Performance Thick Cathodes for Lithium-Sulfur Batteries

AU - Han, Pauline

AU - Chung, Sheng Heng

AU - Manthiram, Arumugam

PY - 2019/4/18

Y1 - 2019/4/18

N2 - Lithium-sulfur (Li-S) batteries are highly considered as a next-generation energy storage device due to their high theoretical energy density. For practical viability, reasonable active-material loading of >4.0 mg cm −2 must be employed, at a cost to the intrinsic instability of sulfur cathodes. The incursion of lithium polysulfides (LiPS) at higher sulfur loadings results in low active material utilization and poor cell cycling capability. The use of high-surface-area hierarchical macro/mesoporous inverse opal (IOP) carbons to investigate the effects of pore volume and surface area on the electrochemical stability of high-loading, high-thickness cathodes for Li-S batteries is presented here. The IOP carbons are additionally doped with pyrrolic-type nitrogen groups (N-IOP) to act as a polar polysulfide mediator and enhance the active-material reutilization. With a high sulfur loading of 6.0 mg cm −2 , the Li-S cells assembled with IOP and N-IOP carbons are able to attain a high specific capacity of, respectively, 1242 and 1162 mA h g −1 . The N-IOP enables the Li-S cells to demonstrate good electrochemical performance over 300 cycles.

AB - Lithium-sulfur (Li-S) batteries are highly considered as a next-generation energy storage device due to their high theoretical energy density. For practical viability, reasonable active-material loading of >4.0 mg cm −2 must be employed, at a cost to the intrinsic instability of sulfur cathodes. The incursion of lithium polysulfides (LiPS) at higher sulfur loadings results in low active material utilization and poor cell cycling capability. The use of high-surface-area hierarchical macro/mesoporous inverse opal (IOP) carbons to investigate the effects of pore volume and surface area on the electrochemical stability of high-loading, high-thickness cathodes for Li-S batteries is presented here. The IOP carbons are additionally doped with pyrrolic-type nitrogen groups (N-IOP) to act as a polar polysulfide mediator and enhance the active-material reutilization. With a high sulfur loading of 6.0 mg cm −2 , the Li-S cells assembled with IOP and N-IOP carbons are able to attain a high specific capacity of, respectively, 1242 and 1162 mA h g −1 . The N-IOP enables the Li-S cells to demonstrate good electrochemical performance over 300 cycles.

UR - http://www.scopus.com/inward/record.url?scp=85063583397&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85063583397&partnerID=8YFLogxK

U2 - 10.1002/smll.201900690

DO - 10.1002/smll.201900690

M3 - Article

C2 - 30913376

AN - SCOPUS:85063583397

VL - 15

JO - Small

JF - Small

SN - 1613-6810

IS - 16

M1 - 1900690

ER -