RAS: a robotic assembly system for steel structure erection and assembly

Ci Jyun Liang, Shih Chung Kang, Meng Hsueh Lee

研究成果: Article同行評審

18 引文 斯高帕斯(Scopus)


This research focuses on a long-standing, yet critical problem in the erection of steel structures. In the current state of practice, steel workers must stand on an unfinished structure to assist with the assembly of structural elements manually. They must pull on the wire hanging under the rigging elements to align the bolting holes of the moving and fixed elements. This work is often performed in high places, which can be very risky. Therefore, we have developed a robotic assembly system (RAS) for steel beam erection and assembly to prevent workers from having to work in a high place. The RAS consists of four methods: rotation, alignment, bolting, and unloading. The rotation method involves a flywheel installed on top of the rigging beam, which aims to rotate the beam to the assembly angle. The alignment method includes both vertical and horizontal alignment. The vertical alignment relies on a camera and a marker on the column to align the beam altitude. The horizontal alignment relies on a specially-designed beam, which allows for it to be smoothly guided into the right position. The bolting method is used to connect the beam to a fixed element. We designed an additional guide hole above each bolt hole. The bolt can be inserted in the guide hole and slid to the bolt hole. The unloading method is used to unload the crane cable and the RAS. We use a pin mechanism for the beam-hook connection so it can easily be unplugged by a motor. The system is built in a scaled experimental construction site to validate its feasibility. The results show that the RAS can operate the assembly process without humans working at risky heights, and can complete faster than the traditional method. In conclusion, we have developed a robotics assembly system that can help reduce the frequency of accidental falls during the steel beam assembly process. The RAS adheres to the process of the current erection method and can be broadly introduced to existing construction sites.

頁(從 - 到)459-476
期刊International Journal of Intelligent Robotics and Applications
出版狀態Published - 2017 12月 1

All Science Journal Classification (ASJC) codes

  • 人工智慧
  • 電腦科學應用


深入研究「RAS: a robotic assembly system for steel structure erection and assembly」主題。共同形成了獨特的指紋。