Reconstruction of complex buildings using LIDAR and 2D maps

Tee Ann Teo, Jiann Yeou Rau, Liang Chien Chen, Jin King Liu, Wei Chen Hsu

研究成果: Conference contribution

12 引文 (Scopus)

摘要

The extraction of the building models from remote-sensed data is an important work in the geographic information systems. This investigation describes an approach to integrate LIDAR data and 2D building boundaries for building reconstruction. The proposed scheme comprises of three major parts: (1) data pre-processing, (2) extraction of building primitive, and (3) shaping. In the data pre-processing, the LIDAR point clouds are structuralized by Triangulated Irregular Networks (TIN) and interpolated as Digital Surface Model (DSM). The building boundaries are traced to form closed polygons. In the extraction of building primitive, we use DSM with Canny Edge Detector to determine the step edges. The ridge lines are extracted from the raw point clouds by using a TIN-based region growing technique. The coplanarity and adjacency are considered for the TIN-based region growing. Finally, the building polygon is divided into several building primitives by the extracted structure lines. In the building reconstruction, we shape the roof of each building primitive by using LIDAR point clouds. The proposed method has been tested with LIDAR data acquired by Leica ALS50 and 1/1000 topomap. Experimental results indicate that the proposed scheme reaches high reliability, and the shaping error of the reconstructed models is better than 0.20 meter.

原文English
主出版物標題Innovations in 3D Geo Information Systems
頁面345-354
頁數10
出版狀態Published - 2006 十二月 1
事件1st International Workshop on 3D Geoinformation, 2006 - Kuala Lumpur, Malaysia
持續時間: 2006 八月 72006 八月 8

出版系列

名字Lecture Notes in Geoinformation and Cartography
ISSN(列印)1863-2351

Other

Other1st International Workshop on 3D Geoinformation, 2006
國家Malaysia
城市Kuala Lumpur
期間06-08-0706-08-08

指紋

triangulated irregular network
building
reconstruction
polygon
Processing
Roofs
Geographic information systems
roof
Detectors
information system

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Geography, Planning and Development
  • Earth-Surface Processes
  • Computers in Earth Sciences

引用此文

Teo, T. A., Rau, J. Y., Chen, L. C., Liu, J. K., & Hsu, W. C. (2006). Reconstruction of complex buildings using LIDAR and 2D maps. 於 Innovations in 3D Geo Information Systems (頁 345-354). (Lecture Notes in Geoinformation and Cartography).
Teo, Tee Ann ; Rau, Jiann Yeou ; Chen, Liang Chien ; Liu, Jin King ; Hsu, Wei Chen. / Reconstruction of complex buildings using LIDAR and 2D maps. Innovations in 3D Geo Information Systems. 2006. 頁 345-354 (Lecture Notes in Geoinformation and Cartography).
@inproceedings{cc2947d412264ebfa54602576c47f91d,
title = "Reconstruction of complex buildings using LIDAR and 2D maps",
abstract = "The extraction of the building models from remote-sensed data is an important work in the geographic information systems. This investigation describes an approach to integrate LIDAR data and 2D building boundaries for building reconstruction. The proposed scheme comprises of three major parts: (1) data pre-processing, (2) extraction of building primitive, and (3) shaping. In the data pre-processing, the LIDAR point clouds are structuralized by Triangulated Irregular Networks (TIN) and interpolated as Digital Surface Model (DSM). The building boundaries are traced to form closed polygons. In the extraction of building primitive, we use DSM with Canny Edge Detector to determine the step edges. The ridge lines are extracted from the raw point clouds by using a TIN-based region growing technique. The coplanarity and adjacency are considered for the TIN-based region growing. Finally, the building polygon is divided into several building primitives by the extracted structure lines. In the building reconstruction, we shape the roof of each building primitive by using LIDAR point clouds. The proposed method has been tested with LIDAR data acquired by Leica ALS50 and 1/1000 topomap. Experimental results indicate that the proposed scheme reaches high reliability, and the shaping error of the reconstructed models is better than 0.20 meter.",
author = "Teo, {Tee Ann} and Rau, {Jiann Yeou} and Chen, {Liang Chien} and Liu, {Jin King} and Hsu, {Wei Chen}",
year = "2006",
month = "12",
day = "1",
language = "English",
isbn = "354036997X",
series = "Lecture Notes in Geoinformation and Cartography",
pages = "345--354",
booktitle = "Innovations in 3D Geo Information Systems",

}

Teo, TA, Rau, JY, Chen, LC, Liu, JK & Hsu, WC 2006, Reconstruction of complex buildings using LIDAR and 2D maps. 於 Innovations in 3D Geo Information Systems. Lecture Notes in Geoinformation and Cartography, 頁 345-354, 1st International Workshop on 3D Geoinformation, 2006, Kuala Lumpur, Malaysia, 06-08-07.

Reconstruction of complex buildings using LIDAR and 2D maps. / Teo, Tee Ann; Rau, Jiann Yeou; Chen, Liang Chien; Liu, Jin King; Hsu, Wei Chen.

Innovations in 3D Geo Information Systems. 2006. p. 345-354 (Lecture Notes in Geoinformation and Cartography).

研究成果: Conference contribution

TY - GEN

T1 - Reconstruction of complex buildings using LIDAR and 2D maps

AU - Teo, Tee Ann

AU - Rau, Jiann Yeou

AU - Chen, Liang Chien

AU - Liu, Jin King

AU - Hsu, Wei Chen

PY - 2006/12/1

Y1 - 2006/12/1

N2 - The extraction of the building models from remote-sensed data is an important work in the geographic information systems. This investigation describes an approach to integrate LIDAR data and 2D building boundaries for building reconstruction. The proposed scheme comprises of three major parts: (1) data pre-processing, (2) extraction of building primitive, and (3) shaping. In the data pre-processing, the LIDAR point clouds are structuralized by Triangulated Irregular Networks (TIN) and interpolated as Digital Surface Model (DSM). The building boundaries are traced to form closed polygons. In the extraction of building primitive, we use DSM with Canny Edge Detector to determine the step edges. The ridge lines are extracted from the raw point clouds by using a TIN-based region growing technique. The coplanarity and adjacency are considered for the TIN-based region growing. Finally, the building polygon is divided into several building primitives by the extracted structure lines. In the building reconstruction, we shape the roof of each building primitive by using LIDAR point clouds. The proposed method has been tested with LIDAR data acquired by Leica ALS50 and 1/1000 topomap. Experimental results indicate that the proposed scheme reaches high reliability, and the shaping error of the reconstructed models is better than 0.20 meter.

AB - The extraction of the building models from remote-sensed data is an important work in the geographic information systems. This investigation describes an approach to integrate LIDAR data and 2D building boundaries for building reconstruction. The proposed scheme comprises of three major parts: (1) data pre-processing, (2) extraction of building primitive, and (3) shaping. In the data pre-processing, the LIDAR point clouds are structuralized by Triangulated Irregular Networks (TIN) and interpolated as Digital Surface Model (DSM). The building boundaries are traced to form closed polygons. In the extraction of building primitive, we use DSM with Canny Edge Detector to determine the step edges. The ridge lines are extracted from the raw point clouds by using a TIN-based region growing technique. The coplanarity and adjacency are considered for the TIN-based region growing. Finally, the building polygon is divided into several building primitives by the extracted structure lines. In the building reconstruction, we shape the roof of each building primitive by using LIDAR point clouds. The proposed method has been tested with LIDAR data acquired by Leica ALS50 and 1/1000 topomap. Experimental results indicate that the proposed scheme reaches high reliability, and the shaping error of the reconstructed models is better than 0.20 meter.

UR - http://www.scopus.com/inward/record.url?scp=84879682477&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84879682477&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84879682477

SN - 354036997X

SN - 9783540369974

T3 - Lecture Notes in Geoinformation and Cartography

SP - 345

EP - 354

BT - Innovations in 3D Geo Information Systems

ER -

Teo TA, Rau JY, Chen LC, Liu JK, Hsu WC. Reconstruction of complex buildings using LIDAR and 2D maps. 於 Innovations in 3D Geo Information Systems. 2006. p. 345-354. (Lecture Notes in Geoinformation and Cartography).