Reference active source current for active power filter in an unbalanced three-phase system via the method of instantaneous power theory

C. L. Chen, C. E. Lin, C. L. Huang

研究成果: Paper

2 引文 斯高帕斯(Scopus)

摘要

A method that uses the principle of geometrical similarity to process the zero-axis voltage and current into zero-sequence active current was used to generate the reference active source current in active filter operating under unbalanced three-phase sinosoidal system. Using the theoretical formulations, it was observed that the proposed method obtained the same results as the equal resistance synchronous detection method. The reference active source current is sinusoidal and in-phase to source voltage, and can be calculated without O-d-q axis conversion. From computer simulations and circuit implementations, both results are satisfactory and have very good agreement.

原文English
頁面1020-1023
頁數4
出版狀態Published - 1994 十二月 1
事件Proceedings of the 1994 IEEE Instrumentation and Measurement Technology Conference. Part 2 (of 3) - Hamamatsu, Jpn
持續時間: 1994 五月 101994 五月 12

Other

OtherProceedings of the 1994 IEEE Instrumentation and Measurement Technology Conference. Part 2 (of 3)
城市Hamamatsu, Jpn
期間94-05-1094-05-12

    指紋

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

引用此

Chen, C. L., Lin, C. E., & Huang, C. L. (1994). Reference active source current for active power filter in an unbalanced three-phase system via the method of instantaneous power theory. 1020-1023. 論文發表於 Proceedings of the 1994 IEEE Instrumentation and Measurement Technology Conference. Part 2 (of 3), Hamamatsu, Jpn, .