Residual vibration suppression of cantilever beam using command shaping techniques

Kuo Shen Chen, Tian Shiang Yang, Jui Feng Yin, Kun Shuan Ou

研究成果: Article同行評審

1 引文 斯高帕斯(Scopus)


Input shaping is an effective method for suppressing the vibration of structures where passive damping cannot be incorporated. Input shaping is used to modify the command signal of a continuous structure to minimize the settling time. The governing equation of the cantilever beam is derived and the mathematical expressions of characterizing the performances of existing discrete type zero-vibration (ZV) and zero-vibration-and-derivative (ZVD) shapers can be derived from this continuous formulation. A system, incorporating a steel beam, a piezoelectric actuator, a capacitive displacement sensor and a computer for shaping command generation, serves as the experimental platform for examining the effectiveness of both shapers. In parallel, a finite element dynamics model is also constructed to simulate the behavior of the beam subjected to the shaped input. The experimental and computer simulation results agree with each other to a great extent, and indicate that when properly designed, both ZV and ZVD shaper could effectively reduce the residual vibration of flexural structures. Meanwhile, the effect of sinusoidal excitation is also studied and the resonance can also be effectively suppressed by utilizing input shaping method.

頁(從 - 到)249-257
期刊Zhongguo Hangkong Taikong Xuehui Huikan/Transactions of the Aeronautical and Astronautical Society of the Republic of China
出版狀態Published - 2004 9月

All Science Journal Classification (ASJC) codes

  • 航空工程


深入研究「Residual vibration suppression of cantilever beam using command shaping techniques」主題。共同形成了獨特的指紋。