Reusing pretreated desulfurization slag to improve clinkerization and clinker grindability for energy conservation in cement manufacture

Ying Liang Chen, Juu En Chang, Pai Haung Shih, Ming Sheng Ko, Yi Kuo Chang, Li Choung Chiang

研究成果: Article

14 引文 (Scopus)

摘要

The purpose of this study was to combine the physical pretreatments of grinding, sieving, and magnetic-separation processes to reclaim iron-rich materials from the desulfurization slag, and to use the remainder for cement clinker production. The iron-rich materials can be separated out efficiently by grinding for 30 min and sieving with a 0.3 mm mesh. The non-magnetic fraction of the particles smaller than 0.3 mm was in the majority, and proved to be suitable for use as a cement raw material. The raw mixes prepared with a pretreated desulfurization slag had a relatively high reactivity, and the temperature at which alite forms was significantly reduced during the clinkerization process. The clinkers produced with 10% desulfurization slag had a high level of alite and good grindability. Generally, the improvements in clinkerization and clinker grindability are beneficial to energy conservation in cement manufacture.

原文English
頁(從 - 到)1892-1897
頁數6
期刊Journal of Environmental Management
91
發行號9
DOIs
出版狀態Published - 2010 九月 1

指紋

Cement manufacture
energy conservation
Desulfurization
slag
Slags
Energy conservation
sieving
grinding
Cements
cement
Iron
iron
Magnetic separation
Raw materials
cement manufacture
temperature
Temperature
material

All Science Journal Classification (ASJC) codes

  • Environmental Engineering
  • Waste Management and Disposal
  • Management, Monitoring, Policy and Law

引用此文

@article{fdfce19141e9477e9881987bc68b1d1e,
title = "Reusing pretreated desulfurization slag to improve clinkerization and clinker grindability for energy conservation in cement manufacture",
abstract = "The purpose of this study was to combine the physical pretreatments of grinding, sieving, and magnetic-separation processes to reclaim iron-rich materials from the desulfurization slag, and to use the remainder for cement clinker production. The iron-rich materials can be separated out efficiently by grinding for 30 min and sieving with a 0.3 mm mesh. The non-magnetic fraction of the particles smaller than 0.3 mm was in the majority, and proved to be suitable for use as a cement raw material. The raw mixes prepared with a pretreated desulfurization slag had a relatively high reactivity, and the temperature at which alite forms was significantly reduced during the clinkerization process. The clinkers produced with 10{\%} desulfurization slag had a high level of alite and good grindability. Generally, the improvements in clinkerization and clinker grindability are beneficial to energy conservation in cement manufacture.",
author = "Chen, {Ying Liang} and Chang, {Juu En} and Shih, {Pai Haung} and Ko, {Ming Sheng} and Chang, {Yi Kuo} and Chiang, {Li Choung}",
year = "2010",
month = "9",
day = "1",
doi = "10.1016/j.jenvman.2010.04.006",
language = "English",
volume = "91",
pages = "1892--1897",
journal = "Journal of Environmental Management",
issn = "0301-4797",
publisher = "Academic Press Inc.",
number = "9",

}

Reusing pretreated desulfurization slag to improve clinkerization and clinker grindability for energy conservation in cement manufacture. / Chen, Ying Liang; Chang, Juu En; Shih, Pai Haung; Ko, Ming Sheng; Chang, Yi Kuo; Chiang, Li Choung.

於: Journal of Environmental Management, 卷 91, 編號 9, 01.09.2010, p. 1892-1897.

研究成果: Article

TY - JOUR

T1 - Reusing pretreated desulfurization slag to improve clinkerization and clinker grindability for energy conservation in cement manufacture

AU - Chen, Ying Liang

AU - Chang, Juu En

AU - Shih, Pai Haung

AU - Ko, Ming Sheng

AU - Chang, Yi Kuo

AU - Chiang, Li Choung

PY - 2010/9/1

Y1 - 2010/9/1

N2 - The purpose of this study was to combine the physical pretreatments of grinding, sieving, and magnetic-separation processes to reclaim iron-rich materials from the desulfurization slag, and to use the remainder for cement clinker production. The iron-rich materials can be separated out efficiently by grinding for 30 min and sieving with a 0.3 mm mesh. The non-magnetic fraction of the particles smaller than 0.3 mm was in the majority, and proved to be suitable for use as a cement raw material. The raw mixes prepared with a pretreated desulfurization slag had a relatively high reactivity, and the temperature at which alite forms was significantly reduced during the clinkerization process. The clinkers produced with 10% desulfurization slag had a high level of alite and good grindability. Generally, the improvements in clinkerization and clinker grindability are beneficial to energy conservation in cement manufacture.

AB - The purpose of this study was to combine the physical pretreatments of grinding, sieving, and magnetic-separation processes to reclaim iron-rich materials from the desulfurization slag, and to use the remainder for cement clinker production. The iron-rich materials can be separated out efficiently by grinding for 30 min and sieving with a 0.3 mm mesh. The non-magnetic fraction of the particles smaller than 0.3 mm was in the majority, and proved to be suitable for use as a cement raw material. The raw mixes prepared with a pretreated desulfurization slag had a relatively high reactivity, and the temperature at which alite forms was significantly reduced during the clinkerization process. The clinkers produced with 10% desulfurization slag had a high level of alite and good grindability. Generally, the improvements in clinkerization and clinker grindability are beneficial to energy conservation in cement manufacture.

UR - http://www.scopus.com/inward/record.url?scp=77953615645&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77953615645&partnerID=8YFLogxK

U2 - 10.1016/j.jenvman.2010.04.006

DO - 10.1016/j.jenvman.2010.04.006

M3 - Article

C2 - 20493627

AN - SCOPUS:77953615645

VL - 91

SP - 1892

EP - 1897

JO - Journal of Environmental Management

JF - Journal of Environmental Management

SN - 0301-4797

IS - 9

ER -