Robotic path planning for an automatic mold polishing system

Ming J. Tsai, Jing-Jing Fang, Jau Lung Chang

研究成果: Article

27 引文 (Scopus)

摘要

This study focuses on path planning of an automatic mold-polishing system. A geometric data structure of the mold was created in the software system according to the IGES format. The 3D model of the mold was reconstructed by the system. The robotic polishing path was planned based on the geometric characteristics of the mold surface and the task requirements. Weaving function embedded in the scanning-line path was created on the planar surface, fractal path was used on the surfaces of revolution, and scanning-line path was used on the free-form surfaces. The mold geometry and the polishing paths were drawn in 3D for verification. Finally, a dedicated five-axes robot executed the polishing path. Experiments showed the path did evenly cover the mold surface and the robotic polishing task satisfied our expectations.

原文English
頁(從 - 到)81-90
頁數10
期刊International Journal of Robotics and Automation
19
發行號2
出版狀態Published - 2004 五月 10

指紋

Polishing
Path Planning
Motion planning
Robotics
Path
Scanning
Geometric Data Structures
Fractals
Surface of revolution
Data structures
Free-form Surface
Line
Robots
3D Model
Software System
Fractal
Geometry
Robot
Cover
Requirements

All Science Journal Classification (ASJC) codes

  • Software
  • Control and Systems Engineering
  • Modelling and Simulation
  • Mechanical Engineering
  • Electrical and Electronic Engineering
  • Artificial Intelligence

引用此文

@article{0c3ba410f45c432da2dcc0d08f3cf8e6,
title = "Robotic path planning for an automatic mold polishing system",
abstract = "This study focuses on path planning of an automatic mold-polishing system. A geometric data structure of the mold was created in the software system according to the IGES format. The 3D model of the mold was reconstructed by the system. The robotic polishing path was planned based on the geometric characteristics of the mold surface and the task requirements. Weaving function embedded in the scanning-line path was created on the planar surface, fractal path was used on the surfaces of revolution, and scanning-line path was used on the free-form surfaces. The mold geometry and the polishing paths were drawn in 3D for verification. Finally, a dedicated five-axes robot executed the polishing path. Experiments showed the path did evenly cover the mold surface and the robotic polishing task satisfied our expectations.",
author = "Tsai, {Ming J.} and Jing-Jing Fang and Chang, {Jau Lung}",
year = "2004",
month = "5",
day = "10",
language = "English",
volume = "19",
pages = "81--90",
journal = "International Journal of Robotics and Automation",
issn = "0826-8185",
publisher = "ACTA Press",
number = "2",

}

Robotic path planning for an automatic mold polishing system. / Tsai, Ming J.; Fang, Jing-Jing; Chang, Jau Lung.

於: International Journal of Robotics and Automation, 卷 19, 編號 2, 10.05.2004, p. 81-90.

研究成果: Article

TY - JOUR

T1 - Robotic path planning for an automatic mold polishing system

AU - Tsai, Ming J.

AU - Fang, Jing-Jing

AU - Chang, Jau Lung

PY - 2004/5/10

Y1 - 2004/5/10

N2 - This study focuses on path planning of an automatic mold-polishing system. A geometric data structure of the mold was created in the software system according to the IGES format. The 3D model of the mold was reconstructed by the system. The robotic polishing path was planned based on the geometric characteristics of the mold surface and the task requirements. Weaving function embedded in the scanning-line path was created on the planar surface, fractal path was used on the surfaces of revolution, and scanning-line path was used on the free-form surfaces. The mold geometry and the polishing paths were drawn in 3D for verification. Finally, a dedicated five-axes robot executed the polishing path. Experiments showed the path did evenly cover the mold surface and the robotic polishing task satisfied our expectations.

AB - This study focuses on path planning of an automatic mold-polishing system. A geometric data structure of the mold was created in the software system according to the IGES format. The 3D model of the mold was reconstructed by the system. The robotic polishing path was planned based on the geometric characteristics of the mold surface and the task requirements. Weaving function embedded in the scanning-line path was created on the planar surface, fractal path was used on the surfaces of revolution, and scanning-line path was used on the free-form surfaces. The mold geometry and the polishing paths were drawn in 3D for verification. Finally, a dedicated five-axes robot executed the polishing path. Experiments showed the path did evenly cover the mold surface and the robotic polishing task satisfied our expectations.

UR - http://www.scopus.com/inward/record.url?scp=2142824231&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=2142824231&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:2142824231

VL - 19

SP - 81

EP - 90

JO - International Journal of Robotics and Automation

JF - International Journal of Robotics and Automation

SN - 0826-8185

IS - 2

ER -