Screw Slot Quality Inspection System Based on Tactile Network

Yan Chun Chen, Ren Hung Hwang, Mu Yen Chen, Chih Chin Wen, Chih Ping Hsu

研究成果: Article同行評審

摘要

The popularity of 5G networks has made smart manufacturing not limited to high-Tech industries such as semiconductors due to its high speed, ultra-high reliability, and low latency. With the advance of system on chip (SoC) design and manufacturing, 5G is also suitable for data transmission in harsh manufacturing environments such as high temperatures, dust, and extreme vibration. The defect of the screw head is caused by the wear and deformation of the die forming the head after mass production. Therefore, the screw quality inspection system based on the tactile network in this article monitors the production quality of the screw; the system will send a warning signal through the router to remind the technician to solve the production problem when the machine produces a defective product. Sensors are embedded into the traditional screw heading machine, and sensing data are transmitted through a gateway to the voluntary computing node for screw slot quality inspection. The anomaly detection data set collected by the screw heading machine has a ratio of anomaly to normal data of 0.006; thus, we propose a time-series deep AutoEncoder architecture for anomaly detection of screw slots. Our experimental results show that the proposed solution outperforms existing works in terms of efficiency and that the specificity and accuracy can reach 97% through the framework proposed in this article.

原文English
文章編號3423556
期刊ACM Transactions on Internet Technology
21
發行號4
DOIs
出版狀態Published - 2021 十一月

All Science Journal Classification (ASJC) codes

  • 電腦網路與通信

指紋

深入研究「Screw Slot Quality Inspection System Based on Tactile Network」主題。共同形成了獨特的指紋。

引用此