Silicon integrated waveguide modulator based on a three-terminal device structure

Wen-Kuei Chuang, Mao Teng Hsu, Zhen Liang Liao, Chih Chieh Cheng

研究成果: Article同行評審

摘要

We report a comprehensive study on the silicon optical waveguide modulators fabricated with and without the isolation trenches based on a modified structure of junction field-effect transistor (JFET). The particular emphases are dedicated to elucidating the influences of various device dimensions on their corresponding modulation efficiencies and frequency responses. Specifically, the enhancement in the modulation depth of the devices was clearly observed as their rib waveguide widths or modulation lengths became respectively wider or longer. In fact, a nearly 100% modulation index could be achieved with a bias voltage as low as 4V. Furthermore, the modulation efficiency of the devices was evidently improved with a substantial degree by adopting a three-terminal JFET structure for signal modulation; the lowest rise and fall times obtained were 250 and 400 ms, respectively. Finally, adding trenches to each side of the rib seemed to impede the carriers flow, thereby slowing down the carrier injection or accumulation speed during the actual device operation.

原文English
文章編號04C117
期刊Japanese Journal of Applied Physics
48
發行號4 PART 2
DOIs
出版狀態Published - 2009 4月 1

All Science Journal Classification (ASJC) codes

  • 工程 (全部)
  • 物理與天文學 (全部)

指紋

深入研究「Silicon integrated waveguide modulator based on a three-terminal device structure」主題。共同形成了獨特的指紋。

引用此