Simulation of PEM fuel cells connected with power converters used for autonomous underwater vehicles

Chien-Hsing Lee, Jian Ting Yang

研究成果: Article

摘要

This paper simulates the electrical behavior of a Ballard Mark V 35-cell 5 kW PEM (proton exchange membrane) fuel cell with power converters under load changes in order to assess whether it can be used as an energy source to power an autonomous underwater vehicle (AUV). Since the fuel cell produces an unregulated dc output voltage, PWM (pulse width modulated) dc-dc converters are connected to the studied fuel cell for converting the unregulated voltage into 5-, 12-, 24-, 24-48-, 120-and 150-V and supplying to the AUV's loads. The fuel cell model considered in this paper consisted of the double-layer charging effect, gas diffusion in the electrodes and the thermodynamic characteristic. Moreover, dc-dc converters are assumed to operate in continuous-conduction mode with a voltage-mode control compensator. The models of the fuel cell and dc-dc converters have been implemented in a MATLAB/SIMULINK. environment. Results show the output voltages of the Ballard Mark V PEM fuel cell with dc-dc power conversion during a load change are stable.

原文English
頁(從 - 到)353-366
頁數14
期刊International Journal of Electrical Engineering
16
發行號5
出版狀態Published - 2009 十月 1

指紋

Autonomous underwater vehicles
Power converters
Proton exchange membrane fuel cells (PEMFC)
Fuel cells
Electric potential
Diffusion in gases
MATLAB
Thermodynamics
Electrodes

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

引用此文

@article{f0e187c8426842cb8dab74ec4a6ceca4,
title = "Simulation of PEM fuel cells connected with power converters used for autonomous underwater vehicles",
abstract = "This paper simulates the electrical behavior of a Ballard Mark V 35-cell 5 kW PEM (proton exchange membrane) fuel cell with power converters under load changes in order to assess whether it can be used as an energy source to power an autonomous underwater vehicle (AUV). Since the fuel cell produces an unregulated dc output voltage, PWM (pulse width modulated) dc-dc converters are connected to the studied fuel cell for converting the unregulated voltage into 5-, 12-, 24-, 24-48-, 120-and 150-V and supplying to the AUV's loads. The fuel cell model considered in this paper consisted of the double-layer charging effect, gas diffusion in the electrodes and the thermodynamic characteristic. Moreover, dc-dc converters are assumed to operate in continuous-conduction mode with a voltage-mode control compensator. The models of the fuel cell and dc-dc converters have been implemented in a MATLAB/SIMULINK. environment. Results show the output voltages of the Ballard Mark V PEM fuel cell with dc-dc power conversion during a load change are stable.",
author = "Chien-Hsing Lee and Yang, {Jian Ting}",
year = "2009",
month = "10",
day = "1",
language = "English",
volume = "16",
pages = "353--366",
journal = "International Journal of Electrical Engineering",
issn = "1812-3031",
publisher = "Chinese Institute of Electrical Engineering",
number = "5",

}

TY - JOUR

T1 - Simulation of PEM fuel cells connected with power converters used for autonomous underwater vehicles

AU - Lee, Chien-Hsing

AU - Yang, Jian Ting

PY - 2009/10/1

Y1 - 2009/10/1

N2 - This paper simulates the electrical behavior of a Ballard Mark V 35-cell 5 kW PEM (proton exchange membrane) fuel cell with power converters under load changes in order to assess whether it can be used as an energy source to power an autonomous underwater vehicle (AUV). Since the fuel cell produces an unregulated dc output voltage, PWM (pulse width modulated) dc-dc converters are connected to the studied fuel cell for converting the unregulated voltage into 5-, 12-, 24-, 24-48-, 120-and 150-V and supplying to the AUV's loads. The fuel cell model considered in this paper consisted of the double-layer charging effect, gas diffusion in the electrodes and the thermodynamic characteristic. Moreover, dc-dc converters are assumed to operate in continuous-conduction mode with a voltage-mode control compensator. The models of the fuel cell and dc-dc converters have been implemented in a MATLAB/SIMULINK. environment. Results show the output voltages of the Ballard Mark V PEM fuel cell with dc-dc power conversion during a load change are stable.

AB - This paper simulates the electrical behavior of a Ballard Mark V 35-cell 5 kW PEM (proton exchange membrane) fuel cell with power converters under load changes in order to assess whether it can be used as an energy source to power an autonomous underwater vehicle (AUV). Since the fuel cell produces an unregulated dc output voltage, PWM (pulse width modulated) dc-dc converters are connected to the studied fuel cell for converting the unregulated voltage into 5-, 12-, 24-, 24-48-, 120-and 150-V and supplying to the AUV's loads. The fuel cell model considered in this paper consisted of the double-layer charging effect, gas diffusion in the electrodes and the thermodynamic characteristic. Moreover, dc-dc converters are assumed to operate in continuous-conduction mode with a voltage-mode control compensator. The models of the fuel cell and dc-dc converters have been implemented in a MATLAB/SIMULINK. environment. Results show the output voltages of the Ballard Mark V PEM fuel cell with dc-dc power conversion during a load change are stable.

UR - http://www.scopus.com/inward/record.url?scp=72449198917&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=72449198917&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:72449198917

VL - 16

SP - 353

EP - 366

JO - International Journal of Electrical Engineering

JF - International Journal of Electrical Engineering

SN - 1812-3031

IS - 5

ER -