Statistical design strategies to optimize properties in emulsion copolymerization of methyl methacrylate and acrylonitrile

T. C. Wen, H. H. Kuo, A. Gopalan

研究成果: Article同行評審

3 引文 斯高帕斯(Scopus)

摘要

Emulsion copolymerization was performed by using (NH4)2S2O8 as an initiator in the presence of an emulsifier (sodium lauryl sulfate). The effect of changing the process variables {initiator concentration, emulsion concentration, feed ratio of monomer [acrylonitrile (AN)/methyl methacrylate (MMA)], and temperature} on the properties of the copolymer was monitored. The polymerization rate, particle size, molecular weight, and polydispersity index (of the polymer chain length) were determined for the polymerization conditions designed by the fractional factorial design method. Estimation of the effects on the polymerization rate through 24-1 fractional factorial design reveals that it depends on the AN/MMA ratio, surfactant concentration, and temperature. The surfactant concentration mainly influences the particle size and molecular weight, while the surfactant concentration and temperature are the key variables in influencing the polydispersity index. A regression equation relating the surfactant concentration, temperature, and polydispersity index is deduced, and the contour plot is made using that. A condition for obtaining the minimum molecular weight distribution was arrived statistically and verified by trial experiments. The minimum molecular weight polydispersity (<3.0) can be obtained at a surfactant concentration of 0.393 g/500 mL of solution and a reaction temperature of 54.6 °C.

原文English
頁(從 - 到)4536-4542
頁數7
期刊Industrial and Engineering Chemistry Research
40
發行號21
DOIs
出版狀態Published - 2001 10月 17

All Science Journal Classification (ASJC) codes

  • 一般化學
  • 一般化學工程
  • 工業與製造工程

指紋

深入研究「Statistical design strategies to optimize properties in emulsion copolymerization of methyl methacrylate and acrylonitrile」主題。共同形成了獨特的指紋。

引用此