Study of a WO3 thin film based hydrogen gas sensor decorated with platinum nanoparticles

Ching Hong Chang, Tzu Chieh Chou, Wei Cheng Chen, Jing Shiuan Niu, Kun Wei Lin, Shiou Ying Cheng, Jung Hui Tsai, Wen Chau Liu

研究成果: Article同行評審

54 引文 斯高帕斯(Scopus)

摘要

A simple platinum nanoparticle (Pt NP)/WO3 semiconducting metal oxide (SMO)-based structure is fabricated and completely studied as a hydrogen gas sensor. In this work, simple rapid thermal evaporation (RTE) was employed to fabricate Pt NPs. This approach could easily produce Pt NPs with a small grain size and uniformity on the WO3 thin film. Experimentally, at 200 °C, the studied device exhibited an excellent hydrogen sensing response of 1.41 × 106 (under a 1% H2/air gas), a very low detecting level of 1 ppm H2/air, and a relatively shorter response (recovery) time of 201 s (26) s. Moreover, first order differential (FOD) and shape-preserving piecewise cubic interpolation (SPPCI) were also employed to overcome the wireless transmission problem for the Internet of Things (IoTs). Furthermore, based on the thermodynamic analysis, the surface coverage performance was studied for this device. As the result, the studied device exhibited practically adsorption with hydrogen gas at 200 °C. The studied device is therefore promising for high-performance hydrogen sensing applications.

原文English
文章編號128145
期刊Sensors and Actuators, B: Chemical
317
DOIs
出版狀態Published - 2020 8月 15

All Science Journal Classification (ASJC) codes

  • 電子、光磁材料
  • 儀器
  • 凝聚態物理學
  • 表面、塗料和薄膜
  • 金屬和合金
  • 電氣與電子工程
  • 材料化學

指紋

深入研究「Study of a WO3 thin film based hydrogen gas sensor decorated with platinum nanoparticles」主題。共同形成了獨特的指紋。

引用此