Study on the Pre-Heated Temperatures and Injection Pressures of the RTM Process

Wen Bin Young, Chaw wu Tseng

研究成果: Article同行評審

34 引文 斯高帕斯(Scopus)

摘要

The objective of this research was to investigate the effects of manufactur ing variables (injection pressure, pre-heated temperature and vacuum assistance) on resin transfer molding (RTM). Specimens were made of 40 plies of TGFC-7628 cloth fiberglass mats or 12 plies of TGFW-600 woven roving fiberglass mats under different process condi tions. The fiber volume contents of the specimens were 50.3 % or 45% in the experiments. The flexural strengths of all the finished products tested by the method of three point bend ing were compared to each other to understand the influences of each process variable on the RTM products. Both the pre-heated temperatures and the injection pressure were found to affect the quality of the RTM product.

原文English
頁(從 - 到)467-482
頁數16
期刊Journal of Reinforced Plastics and Composites
13
發行號5
DOIs
出版狀態Published - 1994 五月

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Mechanics of Materials
  • Mechanical Engineering
  • Polymers and Plastics
  • Materials Chemistry

指紋 深入研究「Study on the Pre-Heated Temperatures and Injection Pressures of the RTM Process」主題。共同形成了獨特的指紋。

引用此