Synthesis of Watt-I path generators with coupler points passing through three or four acceleration poles

Wen Miin Hwang, Jing Ren Wang

研究成果: Article同行評審

2 引文 斯高帕斯(Scopus)

摘要

This article presents a synthesis technique for the planar Watt-I six-bar mechanism with a coupler point passing through three or four acceleration poles. The parametric equations for the loci of the acceleration pole on the fixed link and the coupler plane of the Watt-I mechanism driven by a crank with a constant rotational speed are derived. The desired coupler point of a path generator passing through three or four acceleration poles should be a triple or quadruple point on the locus of the acceleration pole described on the coupler plane. Using the parametric equations and multiple points on the locus of the acceleration pole on the coupler plane, the procedure for synthesizing the Watt-I path generator with a coupler point passing through three or four specified acceleration poles that accord with the specified crank angles is proposed. Two examples are provided to illustrate the feasibility of the proposed method.

原文English
頁(從 - 到)149-160
頁數12
期刊Transactions of the Canadian Society for Mechanical Engineering
36
發行號2
DOIs
出版狀態Published - 2012

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering

指紋 深入研究「Synthesis of Watt-I path generators with coupler points passing through three or four acceleration poles」主題。共同形成了獨特的指紋。

引用此