Temperature rise of hybrid ceramic and steel ball bearings with oil-mist lubrication©

Y. R. Jeng, P. Y. Huang

研究成果: Article

13 引文 斯高帕斯(Scopus)

摘要

Temperature rise of ball bearings is limiting factor to increase rotating speeds. Ball bearings with ceramic balls have been gradually used on many high speed rotating systems due to low material density, low thermal expansion, high Youngs modulus and hardness. Because of high cooling efficiency and low equipment cost, oil-mist lubricating systems have been widely used on various ball bearing systems. Oil-mist lubrication can provide ball bearings with steady air flow and continuous lubrication lubricating oil. A test rig for high-speed ball bearing with different lubrication systems has been developed. Performance test of hybrid ceramic and steel ball bearings under different operating conditions including preload, air flow rate, oil quantity, and rotating speed were conducted in this test rig. The authors test results show that the proper preload of hybrid ceramic ball bearings. The temperature of ball bearings increase with the rotating speed and the hybrid ceramic ball bearing always has lower temperature rise than the steel ball bearing. When the oil supply rate is larger than the proper range, the temperature rise of hybrid ceramic ball bearing and steel ball bearing gets closer. Increasing the air flow rate an efficient way to reduce temperature rise of ball bearings.

原文English
頁面18-24
頁數7
56
12
專業出版物Lubrication Engineering
出版狀態Published - 2000 十二月 1

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering

指紋 深入研究「Temperature rise of hybrid ceramic and steel ball bearings with oil-mist lubrication©」主題。共同形成了獨特的指紋。

  • 引用此