The Design of Aluminum Nitride-Based Lead-Free Piezoelectric MEMS Accelerometer System

Ze Hui Chen, Cheng Ying Li, Sheng Yuan Chu, Cheng Che Tsai, Yi Hsun Wang, Hsueh Yu Kao, Chia Ling Wei, Yen Hsiang Huang, Po Yu Hsiao, Yun Hui Liu

研究成果: Article同行評審

摘要

In this study, we successfully deposited ${c}$ -axis-oriented aluminum nitride piezoelectric films via low-temperature dc sputtering method. Based on the X-ray diffraction (XRD) and TEM analyses, deposited films with a ${c}$ -axis monocrystal were identified. The effective ${d}_{{33},{f}}$ value of the aluminum nitride (AlN) films is 5.92 pC/N, which is better than most of the reported data using dc sputtering processing. Using ANSYS software, we simulated and designed MEMS accelerometers based on AlN films. Furthermore, we successfully fabricated MEMS accelerometers. The sensitivity of the MEMS accelerometer is 1.49 mV/g, and the resonance frequency is 7.2 kHz. The MEMS accelerometer was combined with a sensing circuit constituting a module. The sensitivity of the module increases approximately tenfold. Finally, the vibration of spindles was successfully detected using the designed module.

原文English
文章編號9187544
頁(從 - 到)4399-4404
頁數6
期刊IEEE Transactions on Electron Devices
67
發行號10
DOIs
出版狀態Published - 2020 十月

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

指紋 深入研究「The Design of Aluminum Nitride-Based Lead-Free Piezoelectric MEMS Accelerometer System」主題。共同形成了獨特的指紋。

引用此