TY - JOUR
T1 - The Double Krackow Suture Technique Does Not Offer a Significant Benefit Compared to the Krackow Suture Technique in Subpectoral Biceps Tenodesis Using a Double-Loaded Suture Anchor
AU - Hong, Chih Kai
AU - Hsu, Kai Lan
AU - Kuan, Fa Chuan
AU - Chen, Yueh
AU - Hsu, Che Chia
AU - Yeh, Ming Long
AU - Su, Wei Ren
N1 - Publisher Copyright:
© 2019 Arthroscopy Association of North America
PY - 2020/3
Y1 - 2020/3
N2 - Purpose: To compare the biomechanical properties of the double simple suture (DSS) technique, Krackow suture (KS) technique, and double Krackow suture (DKS) technique in subpectoral biceps tenodesis using a double-loaded suture anchor in a porcine tendon model. Methods: A total of 30 artificial composite (polymer and glass fiber) humeri and porcine flexor profundus tendons with diameter of 4.5 mm were used. The sample size was determined based on the results of the pilot study. Metallic suture anchors with double-loaded No. 2 braided sutures were inserted at the subpectoral tenodesis site, 5 cm from the superomedial corner of the greater tuberosity. Three suture techniques were used to fix the tendons: a DSS used as the control, a KS, and a DKS, which is an alternative tendon graft fixation technique. A preload of 5 N was applied for 2 minutes, followed by cyclic loading for 500 cycles ranging from 5 to 70 N; next, a load-to-failure test at 1 mm/s was performed. Results: The KS (283.5 ± 57 N) and DKS (270.4 ± 50 N) groups had significantly greater ultimate failure loads as compared with the DSS group (84.1 ± 6.4 N) (P < .001). Meanwhile, the peak displacement at failure loads in the KS group (9.3 ± 2.2 mm) and DKS group (7.8 ± 1.7 mm) were significantly smaller than that of the DSS group (11.3 ± 2.9 mm) (P = .015). Stiffness in the DSS group (36.4 ± 3.0 N/mm), KS group (39.6 ± 2.5 N/mm), and DKS group (36.9 ± 4.6 N/mm) was not significantly different (P = .125). All DSS constructs and 6 KS constructs failed with tendons being cut through by the sutures, whereas the other 4 KS constructs and all DKS constructs failed resulting from suture breakage. Conclusions: In this subpectoral biceps tenodesis model, both the KS technique and the DKS technique had similar time 0 biomechanical properties that were better than those of the double simple suture technique. Clinical Relevance: A sturdy suture-tendon structure could prevent clinical failure of a subpectoral biceps tenodesis using a suture anchor.
AB - Purpose: To compare the biomechanical properties of the double simple suture (DSS) technique, Krackow suture (KS) technique, and double Krackow suture (DKS) technique in subpectoral biceps tenodesis using a double-loaded suture anchor in a porcine tendon model. Methods: A total of 30 artificial composite (polymer and glass fiber) humeri and porcine flexor profundus tendons with diameter of 4.5 mm were used. The sample size was determined based on the results of the pilot study. Metallic suture anchors with double-loaded No. 2 braided sutures were inserted at the subpectoral tenodesis site, 5 cm from the superomedial corner of the greater tuberosity. Three suture techniques were used to fix the tendons: a DSS used as the control, a KS, and a DKS, which is an alternative tendon graft fixation technique. A preload of 5 N was applied for 2 minutes, followed by cyclic loading for 500 cycles ranging from 5 to 70 N; next, a load-to-failure test at 1 mm/s was performed. Results: The KS (283.5 ± 57 N) and DKS (270.4 ± 50 N) groups had significantly greater ultimate failure loads as compared with the DSS group (84.1 ± 6.4 N) (P < .001). Meanwhile, the peak displacement at failure loads in the KS group (9.3 ± 2.2 mm) and DKS group (7.8 ± 1.7 mm) were significantly smaller than that of the DSS group (11.3 ± 2.9 mm) (P = .015). Stiffness in the DSS group (36.4 ± 3.0 N/mm), KS group (39.6 ± 2.5 N/mm), and DKS group (36.9 ± 4.6 N/mm) was not significantly different (P = .125). All DSS constructs and 6 KS constructs failed with tendons being cut through by the sutures, whereas the other 4 KS constructs and all DKS constructs failed resulting from suture breakage. Conclusions: In this subpectoral biceps tenodesis model, both the KS technique and the DKS technique had similar time 0 biomechanical properties that were better than those of the double simple suture technique. Clinical Relevance: A sturdy suture-tendon structure could prevent clinical failure of a subpectoral biceps tenodesis using a suture anchor.
UR - http://www.scopus.com/inward/record.url?scp=85078636349&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85078636349&partnerID=8YFLogxK
U2 - 10.1016/j.arthro.2019.11.097
DO - 10.1016/j.arthro.2019.11.097
M3 - Article
C2 - 31973990
AN - SCOPUS:85078636349
SN - 0749-8063
VL - 36
SP - 701
EP - 707
JO - Arthroscopy - Journal of Arthroscopic and Related Surgery
JF - Arthroscopy - Journal of Arthroscopic and Related Surgery
IS - 3
ER -