The feasibility study of micro-EDM hole-drilling method for measuring residual stress

Fu Chuan Hsu; Hwa-Teng Lee; Tzu Yao Tai; Yu Fu Lin; Fritz Klocke

The feasibility study of micro-EDM hole-drilling method for measuring residual stress

Fu Chuan Hsu
, Hwa-Teng Lee
, Tzu Yao Tai
, Yu Fu Lin
, Fritz Klocke

機械工程學系

研究成果: Conference contribution

摘要

The feasible evaluation of Micro-EDM (Electrical Discharge Machining) Hole-Drilling Method is investigated in this study for measuring residual stress. The test materials used in this study are AISI 1045 carbon steel and AISI D2 tool steel. The High-Speed (HS) Hole-Drilling Method, recommended in ASTM Standard E837, is involved for compression purpose. In practice, how to reduce the extra-induced stress generated by the EDM drilling process itself is the main consideration while the hole-drilling strain-gage method is applied in residual stress measurement. The influence factors on the hole-drilling induced stress are discussed in this study.

原文	English
主出版物標題	Proceedings of the 15th International Symposium on Electromachining, ISEM 2007
編輯	Murali Meenakshi Sundaram, K.P. Rajurkar, Ralph L. Resnick
發行者	Industrial and Management Systems Engineering
頁面	205-209
頁數	5
ISBN（電子）	0979497701, 9780979497704
出版狀態	Published - 2007 1月 1
事件	15th International Symposium on Electromachining, ISEM 2007 - Pittsburgh, United States 持續時間: 2007 4月 23 → 2007 4月 27

出版系列

名字	Proceedings of the 15th International Symposium on Electromachining, ISEM 2007

Other

Other	15th International Symposium on Electromachining, ISEM 2007
國家/地區	United States
城市	Pittsburgh
期間	07-04-23 → 07-04-27

UN SDG

此研究成果有助於以下永續發展目標

SDG 9 產業、創新與基礎設施

All Science Journal Classification (ASJC) codes

工業與製造工程
電氣與電子工程

其它文件與鏈接

引用此

Hsu, F. C., Lee, H.-T., Tai, T. Y., Lin, Y. F., & Klocke, F. (2007). The feasibility study of micro-EDM hole-drilling method for measuring residual stress. 於 M. M. Sundaram, K. P. Rajurkar, & R. L. Resnick (編輯), Proceedings of the 15th International Symposium on Electromachining, ISEM 2007 (頁 205-209). (Proceedings of the 15th International Symposium on Electromachining, ISEM 2007). Industrial and Management Systems Engineering.

Hsu, Fu Chuan ; Lee, Hwa-Teng ; Tai, Tzu Yao 等. / The feasibility study of micro-EDM hole-drilling method for measuring residual stress. Proceedings of the 15th International Symposium on Electromachining, ISEM 2007. 編輯 / Murali Meenakshi Sundaram ; K.P. Rajurkar ; Ralph L. Resnick. Industrial and Management Systems Engineering, 2007. 頁 205-209 (Proceedings of the 15th International Symposium on Electromachining, ISEM 2007).

@inproceedings{427dc8f6d29941af876d639141be4d6d,

title = "The feasibility study of micro-EDM hole-drilling method for measuring residual stress",

abstract = "The feasible evaluation of Micro-EDM (Electrical Discharge Machining) Hole-Drilling Method is investigated in this study for measuring residual stress. The test materials used in this study are AISI 1045 carbon steel and AISI D2 tool steel. The High-Speed (HS) Hole-Drilling Method, recommended in ASTM Standard E837, is involved for compression purpose. In practice, how to reduce the extra-induced stress generated by the EDM drilling process itself is the main consideration while the hole-drilling strain-gage method is applied in residual stress measurement. The influence factors on the hole-drilling induced stress are discussed in this study.",

author = "Hsu, \{Fu Chuan\} and Hwa-Teng Lee and Tai, \{Tzu Yao\} and Lin, \{Yu Fu\} and Fritz Klocke",

year = "2007",

month = jan,

day = "1",

language = "English",

series = "Proceedings of the 15th International Symposium on Electromachining, ISEM 2007",

publisher = "Industrial and Management Systems Engineering",

pages = "205--209",

editor = "Sundaram, \{Murali Meenakshi\} and K.P. Rajurkar and Resnick, \{Ralph L.\}",

booktitle = "Proceedings of the 15th International Symposium on Electromachining, ISEM 2007",

note = "15th International Symposium on Electromachining, ISEM 2007 ; Conference date: 23-04-2007 Through 27-04-2007",

}

Hsu, FC, Lee, H-T, Tai, TY, Lin, YF & Klocke, F 2007, The feasibility study of micro-EDM hole-drilling method for measuring residual stress. 於 MM Sundaram, KP Rajurkar & RL Resnick (編輯), Proceedings of the 15th International Symposium on Electromachining, ISEM 2007. Proceedings of the 15th International Symposium on Electromachining, ISEM 2007, Industrial and Management Systems Engineering, 頁 205-209, 15th International Symposium on Electromachining, ISEM 2007, Pittsburgh, United States, 07-04-23.

The feasibility study of micro-EDM hole-drilling method for measuring residual stress. / Hsu, Fu Chuan; Lee, Hwa-Teng; Tai, Tzu Yao 等.
Proceedings of the 15th International Symposium on Electromachining, ISEM 2007. 編輯 / Murali Meenakshi Sundaram; K.P. Rajurkar; Ralph L. Resnick. Industrial and Management Systems Engineering, 2007. p. 205-209 (Proceedings of the 15th International Symposium on Electromachining, ISEM 2007).

研究成果: Conference contribution

TY - GEN

T1 - The feasibility study of micro-EDM hole-drilling method for measuring residual stress

AU - Hsu, Fu Chuan

AU - Lee, Hwa-Teng

AU - Tai, Tzu Yao

AU - Lin, Yu Fu

AU - Klocke, Fritz

PY - 2007/1/1

Y1 - 2007/1/1

N2 - The feasible evaluation of Micro-EDM (Electrical Discharge Machining) Hole-Drilling Method is investigated in this study for measuring residual stress. The test materials used in this study are AISI 1045 carbon steel and AISI D2 tool steel. The High-Speed (HS) Hole-Drilling Method, recommended in ASTM Standard E837, is involved for compression purpose. In practice, how to reduce the extra-induced stress generated by the EDM drilling process itself is the main consideration while the hole-drilling strain-gage method is applied in residual stress measurement. The influence factors on the hole-drilling induced stress are discussed in this study.

AB - The feasible evaluation of Micro-EDM (Electrical Discharge Machining) Hole-Drilling Method is investigated in this study for measuring residual stress. The test materials used in this study are AISI 1045 carbon steel and AISI D2 tool steel. The High-Speed (HS) Hole-Drilling Method, recommended in ASTM Standard E837, is involved for compression purpose. In practice, how to reduce the extra-induced stress generated by the EDM drilling process itself is the main consideration while the hole-drilling strain-gage method is applied in residual stress measurement. The influence factors on the hole-drilling induced stress are discussed in this study.

UR - https://www.scopus.com/pages/publications/84964022229

UR - https://www.scopus.com/pages/publications/84964022229#tab=citedBy

M3 - Conference contribution

AN - SCOPUS:84964022229

T3 - Proceedings of the 15th International Symposium on Electromachining, ISEM 2007

SP - 205

EP - 209

BT - Proceedings of the 15th International Symposium on Electromachining, ISEM 2007

A2 - Sundaram, Murali Meenakshi

A2 - Rajurkar, K.P.

A2 - Resnick, Ralph L.

PB - Industrial and Management Systems Engineering

T2 - 15th International Symposium on Electromachining, ISEM 2007

Y2 - 23 April 2007 through 27 April 2007

ER -

Hsu FC, Lee HT, Tai TY, Lin YF, Klocke F. The feasibility study of micro-EDM hole-drilling method for measuring residual stress. 於 Sundaram MM, Rajurkar KP, Resnick RL, 編輯, Proceedings of the 15th International Symposium on Electromachining, ISEM 2007. Industrial and Management Systems Engineering. 2007. p. 205-209. (Proceedings of the 15th International Symposium on Electromachining, ISEM 2007).

The feasibility study of micro-EDM hole-drilling method for measuring residual stress

摘要

出版系列

Other

UN SDG

All Science Journal Classification (ASJC) codes

其它文件與鏈接

指紋

引用此