The microstructure and fracture behavior of Sn-3Ag-o.5Cu solder joints

T. S. Wang, S. C. Liu, Y. L. Huang, K. L. Lin, Y. S. Lai

研究成果: Conference contribution

摘要

Ball impact test and ball shear test have been used to investigate the joint strength. The joint strength of lead and lead-free solder joints under high strain rate condition were examined. Microstructure in the as-reflowed condition and fracture surfaces were investigated. The intermetallic compounds of Sn-3Ag-0.5Cu joints demonstrated as layer-type (Cu, Ni)6Sn 5. Fractographies show that all of Sn37Pb solder joints exhibit the ductile fracture mode in both tests. On the other hand, Sn-3Ag-0.5Cu solder joints exhibit the interfacial fracture mode. The characteristic curve in both tests could demonstrate the failure feature. The ductile fracture behavior exhibits a long displacement and high fracture energy in both tests. The interfacial fracture behavior exhibits a short range displacement and low fracture energy during the test.

原文English
主出版物標題2008 10th International Conference on Electronic Materials and Packaging, EMAP 2008
頁面293-296
頁數4
DOIs
出版狀態Published - 2008
事件2008 10th International Conference on Electronic Materials and Packaging, EMAP 2008 - Taipei, Taiwan
持續時間: 2008 10月 222008 10月 24

出版系列

名字2008 10th International Conference on Electronic Materials and Packaging, EMAP 2008

Other

Other2008 10th International Conference on Electronic Materials and Packaging, EMAP 2008
國家/地區Taiwan
城市Taipei
期間08-10-2208-10-24

All Science Journal Classification (ASJC) codes

  • 硬體和架構
  • 電氣與電子工程
  • 機械工業

指紋

深入研究「The microstructure and fracture behavior of Sn-3Ag-o.5Cu solder joints」主題。共同形成了獨特的指紋。

引用此