In this study, the electrolytic foam separation process was used to treat metal-chelate solutions at varying pH values and with varying surfactant chelating agent to metal (S/M) ratios. The ionic competition characteristics of the metal-chelate systems and the partitioning of chelates during the electrolytic foam separation process were also investigated by the 1H FT-NMR method. Results of the 1H FT-NMR analysis showed that, in the Ni-citrate-NDDTC(sodium diethyl dithiocarbamate) system with an S/M ratio of 4, the Ni-NDDTC chelate formation efficiencies for pH values of 4, 7, and 10 were 87%, 100%, and 93%, respectively. These results were consistent with measurements of efficiency of Ni removal following 90 minutes of flotation including that the efficiency of Ni removal in the Ni-citrate-NDDTC system was highest at pH=7 (95%), and was lower at pH=4 (38%) and pH=10 (74%). This investigation demonstrates that both the pH value and the S/M ratio are critical parameters for metal removal from the metal-results obtained with each coagulation-flocculation agent were evaluated in terms of the polyelectrolyte concentration parameter.
|頁（從 - 到）||1627-1646|
|期刊||Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering|
|出版狀態||Published - 1999 一月 1|
All Science Journal Classification (ASJC) codes
- Environmental Engineering