The response of 6061-T6 aluminum alloy tubes with different chop depths under cyclic bending

Kuo Long Lee, Ruey Terng Chern, Wen-Fung Pan

研究成果: Article同行評審

1 引文 斯高帕斯(Scopus)

摘要

In this paper, the mechanical behavior and buckling failure of 6061-T6 aluminum alloy tubes with different chop depths subjected to cyclic bending were experimentally investigated. It can be seen that the moment-curvature relationship exhibits a steady loop from the first bending cycle. And, the chop depth has almost no influence on the moment-curvature relationship. However, the ovalization-curvature relationship exhibits an increasing and ratcheting manner with the number of the bending cycles. In addition, higher chop depth of a tube leads to a more severe unsymmetrical trend of the ovalization-curvature relationship. Furthermore, the 6061-T6 aluminum alloy tubes with five different chop depths were tested, five unparallel straight lines were found for the controlled curvature-number of cycles to produce buckling relationship in the log-log scale. Finally, the theoretical model proposed by Kyriakides and Shaw in 1987 was modified in this study for simulating the controlled curvature-number of cycles to produce buckling relationship. Through comparison with the experimental data, the theoretical model can properly simulate the experimental findings.

原文English
頁(從 - 到)19-29
頁數11
期刊Chung Cheng Ling Hsueh Pao/Journal of Chung Cheng Institute of Technology
45
發行號1
出版狀態Published - 2016 5月 1

All Science Journal Classification (ASJC) codes

  • 一般物理與天文學

指紋

深入研究「The response of 6061-T6 aluminum alloy tubes with different chop depths under cyclic bending」主題。共同形成了獨特的指紋。

引用此