Thermal performance of a vertical u-shaped thermosyphon containing a phase-change material suspension fluid

Ching Jenq Ho, Heng I. Hsu, Tai Ann Ho, Chi Ming Lai

研究成果: Article同行評審

2 引文 斯高帕斯(Scopus)

摘要

This study investigated the thermal performance of a vertical U-shaped thermosyphon containing a phase-change material (PCM) suspension fluid via experimentation. The heating and cooling sections were located at the top and bottom of the loop, respectively. The lengths of the heating and cooling sections each accounted for one fifth of the height of the loop. Pure water and a PCM (octadecane) suspension fluid were used to fill the loop to compare the thermal performance of the thermosyphon under different heating power, cooling temperature, and PCM suspension concentration conditions. The results showed that, when the PCM suspension concentration was higher than a critical value, the addition of the PCM suspension had no positive effect on reducing the highest temperature of the fluid in the loop but instead resulted in an increase in fluid temperature. More detailed experiments are needed to observe the phenomena and decide critical values under different experimental parameters.

原文English
文章編號974
期刊Energies
10
發行號7
DOIs
出版狀態Published - 2017

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology
  • Energy (miscellaneous)
  • Control and Optimization
  • Electrical and Electronic Engineering

指紋 深入研究「Thermal performance of a vertical u-shaped thermosyphon containing a phase-change material suspension fluid」主題。共同形成了獨特的指紋。

引用此