Tracking control of an automatic paper joining system: Design and experiments

研究成果: Paper

摘要

This paper presents the results of an experimental setup for an automatic paper joining system that controls a joining device and tracks the moving paper, so that the working paper and the next paper roll to he used are connected while the paper is still moving. The tracking control employs a reflective-type optical sensor mounted on a servo controlled table, to measure the relative positions between a mark on the working paper and the table so that the mark alignment can be controlled during the joining process. The application of this system shows clearly the benefit of being able to reduce the time taken to complete the paper joining procedure, therefore improving efficiency and increasing productivity.

原文English
頁面3588-3593
頁數6
出版狀態Published - 2000 十二月 1
事件Proceedings of the 3th World Congress on Intelligent Control and Automation - Hefei, China
持續時間: 2000 六月 282000 七月 2

Other

OtherProceedings of the 3th World Congress on Intelligent Control and Automation
國家China
城市Hefei
期間00-06-2800-07-02

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Software
  • Computer Science Applications

指紋 深入研究「Tracking control of an automatic paper joining system: Design and experiments」主題。共同形成了獨特的指紋。

  • 引用此

    Tsai, M-C., Wang, Y. S., & Hwang, W-M. (2000). Tracking control of an automatic paper joining system: Design and experiments. 3588-3593. 論文發表於 Proceedings of the 3th World Congress on Intelligent Control and Automation, Hefei, China.