Trajectories of forces and displacements in stable and unstable milling

J. J. Wang, C. F. Sung

研究成果: Article同行評審

2 引文 斯高帕斯(Scopus)

摘要

Analyzing the characteristics of force and tool vibration trajectories during stable and unstable milling processes provides information such as the shape, orientation, and sense of rotation of these trajectories; such information facilitates positively identifying machine chatter. This paper presents analytical models for determining the forces and tool tip displacement during stable and unstable milling with axis-symmetrical structural dynamics. The trajectory of nominal milling forces under both stable and unstable cutting conditions was demonstrated to run clockwise in an elliptical path, with the dynamic forces during chatter running counterclockwise. The tool tip displacements demonstrated the same trajectory pattern as the milling forces. Both the nominal and dynamic forces had similar modal directions, pointing to the right and left sides of the x axis for up and down-millings, respectively. The predictions of the force and tool tip displacement trajectories in stable milling and during chatter were verified using numerical simulations and validated in experiments.

原文English
頁(從 - 到)2803-2819
頁數17
期刊International Journal of Advanced Manufacturing Technology
89
發行號9-12
DOIs
出版狀態Published - 2017 四月 1

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Software
  • Mechanical Engineering
  • Computer Science Applications
  • Industrial and Manufacturing Engineering

指紋 深入研究「Trajectories of forces and displacements in stable and unstable milling」主題。共同形成了獨特的指紋。

引用此