True 3D numerical simulation for micro injection molding

Wen Hsien Yang; Dan Chang; Venny Yang; Pei Chi Chang; Sheng-Jye Hwang

True 3D numerical simulation for micro injection molding

Wen Hsien Yang, Dan Chang, Venny Yang, Pei Chi Chang, Sheng-Jye Hwang

機械工程學系

研究成果: Paper › 同行評審

6 引文斯高帕斯（Scopus）

摘要

The demand for miniature molded parts has been growing over last decade. The filling in micro structure regions are primarily 3D and hence cannot be properly modeled by the 2.5D approach. A 3D model is developed to simulate the micro molding. The numerical results are compared with the experiment.

原文	English
頁面	1270-1274
頁數	5
出版狀態	Published - 2006 7月 10
事件	Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006 - Charlotte, NC, United States 持續時間: 2006 5月 7 → 2006 5月 11

Other

Other	Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006
國家/地區	United States
城市	Charlotte, NC
期間	06-05-07 → 06-05-11

All Science Journal Classification (ASJC) codes

一般化學工程
聚合物和塑料

其它文件與鏈接

引用此

@conference{93cc0120f7ac4086a4541c2d7faaee67,

title = "True 3D numerical simulation for micro injection molding",

abstract = "The demand for miniature molded parts has been growing over last decade. The filling in micro structure regions are primarily 3D and hence cannot be properly modeled by the 2.5D approach. A 3D model is developed to simulate the micro molding. The numerical results are compared with the experiment.",

author = "Yang, {Wen Hsien} and Dan Chang and Venny Yang and Chang, {Pei Chi} and Sheng-Jye Hwang",

year = "2006",

month = jul,

day = "10",

language = "English",

pages = "1270--1274",

note = "Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006 ; Conference date: 07-05-2006 Through 11-05-2006",

}

TY - CONF

T1 - True 3D numerical simulation for micro injection molding

AU - Yang, Wen Hsien

AU - Chang, Dan

AU - Yang, Venny

AU - Chang, Pei Chi

AU - Hwang, Sheng-Jye

PY - 2006/7/10

Y1 - 2006/7/10

N2 - The demand for miniature molded parts has been growing over last decade. The filling in micro structure regions are primarily 3D and hence cannot be properly modeled by the 2.5D approach. A 3D model is developed to simulate the micro molding. The numerical results are compared with the experiment.

AB - The demand for miniature molded parts has been growing over last decade. The filling in micro structure regions are primarily 3D and hence cannot be properly modeled by the 2.5D approach. A 3D model is developed to simulate the micro molding. The numerical results are compared with the experiment.

UR - http://www.scopus.com/inward/record.url?scp=33745622876&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33745622876&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:33745622876

SP - 1270

EP - 1274

T2 - Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006

Y2 - 7 May 2006 through 11 May 2006

ER -

True 3D numerical simulation for micro injection molding

摘要

Other

All Science Journal Classification (ASJC) codes

其它文件與鏈接

指紋

引用此