Optimal design of composite patch repair

論文翻譯標題: 複材修補之最佳設計
  • 柯 艾莎

學生論文: Master's Thesis

摘要

This master thesis report relates the process leading toward the volume optimization of a composite patch repairing a through thickness crack in a metallic plate using the Finite Element software ANSYS First two-dimension and three-dimension models are build using ANSYS Then validation of the numerical model are done by calculation of the stress intensity factor K of the crack tip both through the analytical solution and the Anisotropic Elastic Plate – Hwu’s software The value of the stress intensity factor and the y component of the stress ahead of the crack tip are linked: when the stress decreases so does the stress intensity factor Thus in order to save computational time the optimization of the repair is conducted such as decreasing the y component of the stress ahead of the crack tip Different approaches of optimization process are tested One procedure involves the length width thickness and fiber orientation of the composite patch Another sets the number of layers of composite and leaves the other input value as variables that will change throughout the optimization process At the end the final K obtained on the optimal configuration is computed and compared with the initial one to prove the efficiency of the repair
獎項日期2017 二月 2
原文English
監督員Chyanbin Hwu (Supervisor)

引用此

Optimal design of composite patch repair
艾莎, 柯. (Author). 2017 二月 2

學生論文: Master's Thesis